From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Larmour To: Usmamih Rahkes Cc: ecos-discuss@sources.redhat.com Subject: Re: [ECOS] i386 target Date: Sun, 17 Jun 2001 04:14:00 -0000 Message-id: <3B2C9186.FA5AD250@redhat.com> References: X-SW-Source: 2001-06/msg00556.html Usmamih Rahkes wrote: > > Hi, > Could anyone tell me how to make a bootable floppy for a PC target for eCos. > Which image have I to put on the floppy. > > I found somebody asking the same for a linux target, but my host is WinNT. > > I was trying to find it in eCos documentation that was installed, but > couldn't. If this is CVS eCos then the guide is http://sources.redhat.com/ecos/docs-latest/redboot/x86pc.html If this is eCos v1.3.1 then you can probably adapt the above instructions by just changing the filename. There should be a prebuilt image in the loaders/ directory of your eCos directory. Or if not you can rebuilt it using the "stubs" template: when you build the eCos library with this template the gdb_module.bin file will be in the bin directory of your eCos configuration's install tree. But there's been many improvements in the CVS version of eCos so it's probably worth trying to get that. http://sources.redhat.com/ecos/anoncvs.html Jifl -- Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062 Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine Come to the Red Hat TechWorld open source conference in Brussels! Keynotes, techie talks and exhibitions http://www.redhat-techworld.com/