* RE: [ECOS] ARM926EJ-S device with Ethernet
@ 2006-08-07 21:02 Zimman, Chris
0 siblings, 0 replies; 3+ messages in thread
From: Zimman, Chris @ 2006-08-07 21:02 UTC (permalink / raw)
To: Ray Duran, ecos-discuss
Ray,
Check out the Freescale i.MX27, it has an MMU and a 10/100 MAC on board,
although I'm not 100% on the trace buffer (although I would think it
likely).
--Chris
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Ray Duran
Sent: Monday, August 07, 2006 3:33 PM
To: ecos-discuss@ecos.sourceware.org
Subject: [ECOS] ARM926EJ-S device with Ethernet
Hello,
I am new to eCos environment.
I researched the eCos archives and found activity on porting of Redboot
ARM926EJ-S.
That makes me feel good.
Does anyone know of a processor with ARM926EJ-S core and either an
on-board or hooks for connecting to an extrenal ethernet, with a
development
board availiable of course?
After a couple of days researching on-line, the candidates that I have
come up with,
Freescale MX21, and Philips LPC3180 are missing on of my three
requirements: MMU, trace buffer and on-board or external ethernet.
Any feedback is greatly appreciated.
Regards,
-Ray
Ray Duran
Altera Design Specialist
Future Electronics
2220 O'Toole Avenue
San Jose Ca. 95131
408 232 1478
ray.duran@futureelectronics.com
The information in this transmission contains information that is
confidential and is intended only for the use of the individual or
entity to whom it is addressed. If the reader of this message is not the
intended recipient please delete it and immediately notify the sender.
If the purpose of this transmission is to provide a quotation or to
confirm or acknowledge an order or to provide information in relation to
the Products and Services offered, unless otherwise agreed in writing,
the FUTURE ELECTRONICS TERMS AND CONDITIONS OF SALE exclusively govern
the sale of Products and the provision of services by Future Electronics
Inc. and its divisions, subsidiaries and affiliates and take precedence
over supplemental or conflicting terms and conditions to which notice of
objection is hereby given. The FUTURE ELECTRONICS TERMS AND CONDITIONS
OF SALE are available at www.futureelectronics.com
<http://www.futureelectronics.com/> and may be provided on invoices,
packing slips, order acknowledgements or other method.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ECOS] ARM926EJ-S device with Ethernet
2006-08-07 19:33 Ray Duran
@ 2006-08-07 19:35 ` Tim michals
0 siblings, 0 replies; 3+ messages in thread
From: Tim michals @ 2006-08-07 19:35 UTC (permalink / raw)
To: Ray Duran, ecos-discuss
Atmel
http://www.atmel.com/dyn/products/devices.asp?family_id=605#1739
--- Ray Duran <Ray.Duran@FutureElectronics.com> wrote:
> Hello,
>
> I am new to eCos environment.
>
> I researched the eCos archives and found activity on
> porting of Redboot
> ARM926EJ-S.
> That makes me feel good.
>
> Does anyone know of a processor with ARM926EJ-S core
> and either an
> on-board or hooks for connecting to an extrenal
> ethernet, with a
> development
> board availiable of course?
>
> After a couple of days researching on-line, the
> candidates that I have
> come up with,
> Freescale MX21, and Philips LPC3180 are missing on
> of my three
> requirements: MMU, trace buffer and on-board or
> external ethernet.
>
> Any feedback is greatly appreciated.
>
> Regards,
>
> -Ray
>
> Ray Duran
> Altera Design Specialist
> Future Electronics
> 2220 O'Toole Avenue
> San Jose Ca. 95131
> 408 232 1478
> ray.duran@futureelectronics.com
>
> The information in this transmission contains
> information that is
> confidential and is intended only for the use of the
> individual or
> entity to whom it is addressed. If the reader of
> this message is not the
> intended recipient please delete it and immediately
> notify the sender.
> If the purpose of this transmission is to provide a
> quotation or to
> confirm or acknowledge an order or to provide
> information in relation to
> the Products and Services offered, unless otherwise
> agreed in writing,
> the FUTURE ELECTRONICS TERMS AND CONDITIONS OF SALE
> exclusively govern
> the sale of Products and the provision of services
> by Future Electronics
> Inc. and its divisions, subsidiaries and affiliates
> and take precedence
> over supplemental or conflicting terms and
> conditions to which notice of
> objection is hereby given. The FUTURE ELECTRONICS
> TERMS AND CONDITIONS
> OF SALE are available at www.futureelectronics.com
> <http://www.futureelectronics.com/> and may be
> provided on invoices,
> packing slips, order acknowledgements or other
> method.
>
>
> --
> Before posting, please read the FAQ:
> http://ecos.sourceware.org/fom/ecos
> and search the list archive:
> http://ecos.sourceware.org/ml/ecos-discuss
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ECOS] ARM926EJ-S device with Ethernet
@ 2006-08-07 19:33 Ray Duran
2006-08-07 19:35 ` Tim michals
0 siblings, 1 reply; 3+ messages in thread
From: Ray Duran @ 2006-08-07 19:33 UTC (permalink / raw)
To: ecos-discuss
Hello,
I am new to eCos environment.
I researched the eCos archives and found activity on porting of Redboot
ARM926EJ-S.
That makes me feel good.
Does anyone know of a processor with ARM926EJ-S core and either an
on-board or hooks for connecting to an extrenal ethernet, with a
development
board availiable of course?
After a couple of days researching on-line, the candidates that I have
come up with,
Freescale MX21, and Philips LPC3180 are missing on of my three
requirements: MMU, trace buffer and on-board or external ethernet.
Any feedback is greatly appreciated.
Regards,
-Ray
Ray Duran
Altera Design Specialist
Future Electronics
2220 O'Toole Avenue
San Jose Ca. 95131
408 232 1478
ray.duran@futureelectronics.com
The information in this transmission contains information that is
confidential and is intended only for the use of the individual or
entity to whom it is addressed. If the reader of this message is not the
intended recipient please delete it and immediately notify the sender.
If the purpose of this transmission is to provide a quotation or to
confirm or acknowledge an order or to provide information in relation to
the Products and Services offered, unless otherwise agreed in writing,
the FUTURE ELECTRONICS TERMS AND CONDITIONS OF SALE exclusively govern
the sale of Products and the provision of services by Future Electronics
Inc. and its divisions, subsidiaries and affiliates and take precedence
over supplemental or conflicting terms and conditions to which notice of
objection is hereby given. The FUTURE ELECTRONICS TERMS AND CONDITIONS
OF SALE are available at www.futureelectronics.com
<http://www.futureelectronics.com/> and may be provided on invoices,
packing slips, order acknowledgements or other method.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-08-07 21:02 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-08-07 21:02 [ECOS] ARM926EJ-S device with Ethernet Zimman, Chris
-- strict thread matches above, loose matches on Subject: below --
2006-08-07 19:33 Ray Duran
2006-08-07 19:35 ` Tim michals
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).