From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gozman Florian Leonard To: ecos-discuss@sources.redhat.com Subject: [ECOS] Installing RedBoot into AT91EB40 board (write into FLASH memory)) Date: Thu, 02 Aug 2001 23:38:00 -0000 Message-id: <3B6A4834.A9D4CAB4@bluegem.codec.ro> X-SW-Source: 2001-08/msg00099.html Hi! Thanks for previous reply. I have a problem when I try to write into FLASH. The messages which occur into minicom are: RedBoot>load -m y -b 0x02040000 // select redboot_ROMRAM.srec file and send it cs range: 0x02000000-0x0200c53c xyzModem - CRC mode, 1098(SOH)/0(STX)/0(CAN) packets, 11 retries RedBoot>fis write -f 0x01010000 -b 0x02040000 -l 0xe000 * CAUTION * about to program FLASH at 0x01010000..0x0101dfff from 0x02040000 - // block !!! if I pressed CR => RedBoot> This message should be occur or not ? After that, I press reset button on my board and nothing happens. (Ofcourse the SW1 switch is "UPPER MEM"). Thanks! Leonard -- Leonard