[ECOS] Installing RedBoot into AT91EB40 board (write into FLASH memory))

[ECOS] Installing RedBoot into AT91EB40 board (write into FLASH memory))

[Gozman Florian Leonard]

Hi!

Thanks for previous reply.

I have a problem when I try to write into FLASH. The messages which
occur into minicom are:


RedBoot>load -m y -b 0x02040000   // select redboot_ROMRAM.srec file and
send it
cs range: 0x02000000-0x0200c53c
xyzModem - CRC mode, 1098(SOH)/0(STX)/0(CAN) packets, 11 retries
RedBoot>fis write -f 0x01010000 -b 0x02040000 -l 0xe000
* CAUTION * about to program FLASH at 0x01010000..0x0101dfff from
0x02040000 -  // block !!! if I pressed CR => RedBoot>

This message should be occur or not ?
After that, I press reset button on my board and nothing happens.
(Ofcourse the SW1 switch is "UPPER MEM").

Thanks!

Leonard





--

 Leonard

Re: [ECOS] Installing RedBoot into AT91EB40 board (write into FLASH memory))

[Jonathan Larmour]

Gozman Florian Leonard wrote:
> 
> Hi!
> 
> Thanks for previous reply.
> 
> I have a problem when I try to write into FLASH. The messages which
> occur into minicom are:
> 
> RedBoot>load -m y -b 0x02040000   // select redboot_ROMRAM.srec file and
> send it
> cs range: 0x02000000-0x0200c53c
> xyzModem - CRC mode, 1098(SOH)/0(STX)/0(CAN) packets, 11 retries
> RedBoot>fis write -f 0x01010000 -b 0x02040000 -l 0xe000
> * CAUTION * about to program FLASH at 0x01010000..0x0101dfff from
> 0x02040000 -  // block !!! if I pressed CR => RedBoot>

Looks like your terminal emulator cut off the rest of the line - it was
probably asking for confirmation. Type "y" at the point it blocks.

Jifl
-- 
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine