From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Larmour To: Gozman Florian Leonard Cc: ecos-discuss@sources.redhat.com Subject: Re: [ECOS] Installing RedBoot into AT91EB40 board (write into FLASH memory)) Date: Fri, 03 Aug 2001 05:33:00 -0000 Message-id: <3B6A9A0B.2E015C43@redhat.com> References: <3B6A4834.A9D4CAB4@bluegem.codec.ro> X-SW-Source: 2001-08/msg00112.html Gozman Florian Leonard wrote: > > Hi! > > Thanks for previous reply. > > I have a problem when I try to write into FLASH. The messages which > occur into minicom are: > > RedBoot>load -m y -b 0x02040000 // select redboot_ROMRAM.srec file and > send it > cs range: 0x02000000-0x0200c53c > xyzModem - CRC mode, 1098(SOH)/0(STX)/0(CAN) packets, 11 retries > RedBoot>fis write -f 0x01010000 -b 0x02040000 -l 0xe000 > * CAUTION * about to program FLASH at 0x01010000..0x0101dfff from > 0x02040000 - // block !!! if I pressed CR => RedBoot> Looks like your terminal emulator cut off the rest of the line - it was probably asking for confirmation. Type "y" at the point it blocks. Jifl -- Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062 Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine