From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Larmour To: "Trenton D. Adams" Cc: 'eCos Disuss' Subject: Re: [ECOS] program doesn't work with new redboot Date: Fri, 10 Aug 2001 14:28:00 -0000 Message-id: <3B7451EE.8ACB70E0@redhat.com> References: <003d01c121d9$f0283030$090110ac@TRENT> X-SW-Source: 2001-08/msg00346.html "Trenton D. Adams" wrote: > > My program won't work with the new redboot I just compiled. It does the > following. > > $ arm-elf-gdb.exe -nw RigSystem.exe > GNU gdb 5.0 > Copyright 2000 Free Software Foundation, Inc. > GDB is free software, covered by the GNU General Public License, and you > are > welcome to change it and/or distribute copies of it under certain > conditions. > Type "show copying" to see the conditions. > There is absolutely no warranty for GDB. Type "show warranty" for > details. > This GDB was configured as "--host=i686-pc-cygwin --target=arm-elf"... > (gdb) set remotebaud 115200 > (gdb) target remote com1 > Remote debugging using com1 > 0xe0006630 in ?? () > (gdb) load > Loading section .rom_vectors, size 0x40 lma 0x20000 > Loading section .text, size 0x389c0 lma 0x20040 > Loading section .rodata, size 0x1a1b8 lma 0x58a00 > Loading section .data, size 0x1194 lma 0x72bb8 > Start address 0x20040 , load size 343372 > Ignoring packet error, continuing... Just a download error? > Transfer rate: 80793 bits/sec, 306 bytes/write. > (gdb) cont > Continuing. > Ignoring packet error, continuing... > Interrupted while waiting for the program. > Give up (and stop debugging it)? (y or n) y > (gdb) > > Any ideas? set debug remote 1 Or just... try again, it could have just been a flaky download, or is it repeatable. Jifl -- Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062 Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine