From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mats Nordlund To: ecos-discuss@sources.redhat.com Cc: Jonathan Larmour Subject: Re: [ECOS] Re: Problems with RedBoot on x86 generic pc... Date: Fri, 07 Sep 2001 00:56:00 -0000 Message-id: <3B987E26.5051BF72@telia.se> References: <000401c13162$b4c7bef0$090110ac@TRENT> <3B8F3A1A.ACC9B7B8@telia.se> <3B986ED0.9BF3E633@redhat.com> <3B98751C.CBB1B6B2@telia.se> <3B9876CC.EA12FCBA@redhat.com> X-SW-Source: 2001-09/msg00173.html Ok, with a rebuilt image I can now issue the 'channel' command. Each time I type 'channel -1', I get a new "RedBoot>" on my serial terminal, but the problem still remains: I cannot issue commands from the serial terminal - my keyboard strokes are just ignored in some way. Neither the commands issued at the console are displayed to the serial terminal. The only thing passed to the serial terminal is the "welcome screen" and the output from 'channel -1', that is, "RedBoot>". This problem is no big thing, I just wanted to start playing a little with eCos and figured that this could be a good way to start. Anyway, any other suggestions to this strange behaviour is of course welcome. br / Mats Jonathan Larmour wrote: > > Mats Nordlund wrote: > > > > Maybe it's just me, but the RedBoot CLI doesn't seem to recognise the > > command 'channel'. I'm using the prebuilt *.bin dated June 8. > > > > Is it necessary to rebuild from source with some "channel option" > > enabled? > > Sorry yes, the channel command predates that image. > > Jifl > -- > Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062 > Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine