* [ECOS] upload program in NEC V850 RAM
@ 2003-04-22 12:52 Teresa Fazio
2003-04-22 21:18 ` Jonathan Larmour
0 siblings, 1 reply; 4+ messages in thread
From: Teresa Fazio @ 2003-04-22 12:52 UTC (permalink / raw)
To: ecos-discuss
Hi,
I'm new in this mailing list and I found someone of you having problems in uploading
programs in NEC V850 RAM, like me.
When I try to load a simple program Hello.S3, I do
RedBoot>load
Ctrl a + s
choice ymodem and then the file Hello.S3.
But the answer is:
CCCCCCCCCCCCCCCC*** Warning! Attempt to load S-record to address: 0xffffffff
RedBoot does not believe this is in RAM
Use TFTP for a chance to override this.
*** Warning! Checksum failure - Addr: ffffffff, EF <> 00
xyzModem - CRC mode, 647(SOH)/4(STX)/5(CAN) packets, 316 retries
What is the problem?
Thanks in advance.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] upload program in NEC V850 RAM
2003-04-22 12:52 [ECOS] upload program in NEC V850 RAM Teresa Fazio
@ 2003-04-22 21:18 ` Jonathan Larmour
2003-04-23 8:08 ` Cristoforo Abbattista
0 siblings, 1 reply; 4+ messages in thread
From: Jonathan Larmour @ 2003-04-22 21:18 UTC (permalink / raw)
To: Teresa Fazio; +Cc: ecos-discuss
Teresa Fazio wrote:
> Hi,
> I'm new in this mailing list and I found someone of you having problems in uploading
> programs in NEC V850 RAM, like me.
> When I try to load a simple program Hello.S3, I do
>
> RedBoot>load
>
> Ctrl a + s
> choice ymodem and then the file Hello.S3.
> But the answer is:
>
> CCCCCCCCCCCCCCCC*** Warning! Attempt to load S-record to address: 0xffffffff
> RedBoot does not believe this is in RAM
> Use TFTP for a chance to override this.
> *** Warning! Checksum failure - Addr: ffffffff, EF <> 00
> xyzModem - CRC mode, 647(SOH)/4(STX)/5(CAN) packets, 316 retries
>
> What is the problem?
The addresses in your s-record file indicate it should be loaded to
0xffffffff, which isn't right. Check your s-record file, and how it was
built, and particularly how the memory map was linked.
Or more relevantly, if it isn't an s-record file, either convert it to one
or choose the appropriate flag to "load" to tell redboot what format it is!
Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
--[ "You can complain because roses have thorns, or you ]--
--[ can rejoice because thorns have roses." -Lincoln ]-- Opinions==mine
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] upload program in NEC V850 RAM
2003-04-22 21:18 ` Jonathan Larmour
@ 2003-04-23 8:08 ` Cristoforo Abbattista
2003-04-23 12:12 ` Jonathan Larmour
0 siblings, 1 reply; 4+ messages in thread
From: Cristoforo Abbattista @ 2003-04-23 8:08 UTC (permalink / raw)
To: Jonathan Larmour; +Cc: ecos-discuss
oK, it could be so,
but why the code is loaded and executed if we try to load it by the
v850-elf-gdb?
Thank you for any help
Cris
> Teresa Fazio wrote:
> > Hi,
> > I'm new in this mailing list and I found someone of you having
> > problems in uploading programs in NEC V850 RAM, like me. When I
> > try to load a simple program Hello.S3, I do
> >
> > RedBoot>load
> >
> > Ctrl a + s
> > choice ymodem and then the file Hello.S3.
> > But the answer is:
> >
> > CCCCCCCCCCCCCCCC*** Warning! Attempt to load S-record to address:
> > 0xffffffff RedBoot does not believe this is in RAM Use TFTP for a
> > chance to override this. *** Warning! Checksum failure - Addr:
> > ffffffff, EF <> 00 xyzModem - CRC mode, 647(SOH)/4(STX)/5(CAN)
> > packets, 316 retries
> >
> > What is the problem?
>
> The addresses in your s-record file indicate it should be loaded to
> 0xffffffff, which isn't right. Check your s-record file, and how it
> was built, and particularly how the memory map was linked.
>
> Or more relevantly, if it isn't an s-record file, either convert it to
> one or choose the appropriate flag to "load" to tell redboot what
> format it is!
>
> Jifl
> --
> eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot
> experts --[ "You can complain because roses have thorns, or you ]--
> --[ can rejoice because thorns have roses." -Lincoln ]--
> Opinions==mine
>
>
> --
> Before posting, please read the FAQ:
> http://sources.redhat.com/fom/ecos and search the list archive:
> http://sources.redhat.com/ml/ecos-discuss
=========================================
Ing. Cristoforo ABBATTISTA
Planetek Italia s.r.l.
Via Massaua, 12 I-70123 Bari
Tel.: +39 080 5343750 - Fax: +39 080 5340280
cristoforo.abbattista@planetek.it
Web: http://www.planetek.it
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] upload program in NEC V850 RAM
2003-04-23 8:08 ` Cristoforo Abbattista
@ 2003-04-23 12:12 ` Jonathan Larmour
0 siblings, 0 replies; 4+ messages in thread
From: Jonathan Larmour @ 2003-04-23 12:12 UTC (permalink / raw)
To: Cristoforo Abbattista; +Cc: ecos-discuss
Cristoforo Abbattista wrote:
> oK, it could be so,
> but why the code is loaded and executed if we try to load it by the
> v850-elf-gdb?
If this is the *very same* file that you load into v850-elf-gdb, then that
may well show I'm right :-). GDB accepts ELF format file, but I could well
believe ELF load support is disabled in the v850 redboot to save space.
You can try converting the file to an srec file using "v850-elf-objcopy -O
srec infile outfile.srec". If Hello.S3 really is an srec file you should
be able to just open it in a text editor or "more" and it should look
something like:
S010000076383530666C6173682E6865785B
S1180000070A400F4CF0010A400F64F08F07F4FF8F07F2FF008D
S11800150000000000000000000000BC0700000000000000000F
S118002A000000000000BC0700000000000000000000000000FA
although obviously the actual numbers vary.
>>Teresa Fazio wrote:
>>
>>>Hi,
>>>I'm new in this mailing list and I found someone of you having
>>>problems in uploading programs in NEC V850 RAM, like me. When I
>>>try to load a simple program Hello.S3, I do
>>>
>>>RedBoot>load
>>>
>>>Ctrl a + s
>>>choice ymodem and then the file Hello.S3.
>>>But the answer is:
>>>
>>>CCCCCCCCCCCCCCCC*** Warning! Attempt to load S-record to address:
>>>0xffffffff RedBoot does not believe this is in RAM Use TFTP for a
>>>chance to override this. *** Warning! Checksum failure - Addr:
>>>ffffffff, EF <> 00 xyzModem - CRC mode, 647(SOH)/4(STX)/5(CAN)
>>>packets, 316 retries
>>>
>>>What is the problem?
>>
>>The addresses in your s-record file indicate it should be loaded to
>>0xffffffff, which isn't right. Check your s-record file, and how it
>>was built, and particularly how the memory map was linked.
>>
>>Or more relevantly, if it isn't an s-record file, either convert it to
>>one or choose the appropriate flag to "load" to tell redboot what
>>format it is!
>>
>>Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
--[ "You can complain because roses have thorns, or you ]--
--[ can rejoice because thorns have roses." -Lincoln ]-- Opinions==mine
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-04-23 12:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-04-22 12:52 [ECOS] upload program in NEC V850 RAM Teresa Fazio
2003-04-22 21:18 ` Jonathan Larmour
2003-04-23 8:08 ` Cristoforo Abbattista
2003-04-23 12:12 ` Jonathan Larmour
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).