From: Eric Doenges <Eric.Doenges@DynaPel.com>
To: Dhawal Mer <merdn@LNTEBG.com>
Cc: andrew@lunn.ch, ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] Hi,
Date: Tue, 14 Oct 2003 12:01:00 -0000 [thread overview]
Message-ID: <3F8BE5CB.7080909@DynaPel.com> (raw)
In-Reply-To: <sf8c2f51.012@EBGMAIL>
Dhawal Mer wrote:
> Hi,
> Thanx for your URL info.
> As per your mentioned URL, i have downloaded the rltk8139.tgz .
> I tried to added the rltk driver as one of the package in eCos.db as shown below.
> -------------------------------------------------------------------------------------------
> eCos.db
> ------------------------------------------------------------------------------------------
> package CYGPKG_DEVS_ETH_RLTK_8139 {
> alias { "RLTK 8139 ethernet driver"
> devs_eth_rltk_8139 8139_eth_driver }
> hardware
> directory devs/eth/rltk/8139
> script rltk_8139_eth_drivers.cdl
> description "Ethernet driver for RLTK 8139 NIC."
> }
> - - - - - - - - - - ---- ---- - - -
> package CYGPKG_DEVS_ETH_I386_PC_RLTK8139 {
> alias { "Standard PC with EtherPro 10/100 ethernet device"
> devs_eth_i386_pc_8139 pc_etherpro }
> hardware
> directory devs/eth/i386/pc/rltk8139
> script i386_pc_rltk8139_eth_drivers.cdl
> description "Ethernet driver for standard PC with Intel 8139 NIC. This is
> essentially support for a EtherPro 10/100 PCI card."
> }
>
> -------------------------------------------------------------------------------------------
> After adding above statements, The RTL8139 driver get added to the package list as 'PC RealTek 8139 ethernet driver'.I have also added RTL8139 macro in the default list of i386 & removed the 82559 macro.
> But when I try to configure i386 as target with RTL8139 as a NIC( Redboot as a Package ),the Option 'PC RealTek 8139 ethernet driver' in the Configuration windows remains disabled (It was showing all sub-options in disable mode too..).
> Please mail me where i am wrong & if possible send me, brief procedure for adding above rltk8139 driver into the eCos Configtool 2.1/eCos Configtool 1.3.
> Please also note that i have onboard ethernet , do i need to change anything in above driver for the same.
You will also need a 'target' in ecos.db somewhat like this:
target pc_8139 {
alias { "i386 PC target with RealTek 8139 ethernet" }
packages { CYGPKG_HAL_I386
CYGPKG_HAL_I386_GENERIC
CYGPKG_HAL_I386_PC
CYGPKG_HAL_I386_PCMB
CYGPKG_IO_PCI
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_IO_SERIAL_I386_PC
CYGPKG_DEVS_ETH_RLTK_8139
CYGPKG_DEVS_ETH_I386_PC_RLTK8139
CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
CYGPKG_DEVICES_WALLCLOCK_I386_PC
}
description "The pc target provides the
packages needed to run eCos binaries on a standard i386
PC motherboard (with RealTek 8139 NIC)."
}
Then, in the configtool choose the menu item 'Build->Templates', and
select the pc_8139 target and the 'net' package in the dialog. It
shouldn't matter if the 8139 is onboard or not to the driver.
Please note that I don't have an i386 PC target to test so I can't
really help you much further if there are PC-specific problems.
--
--------------------------------------------------------------------
| Eric Doenges | DynaPel Laboratories GmbH |
| Tel: +49 89 962428 23 | Fraunhoferstrasse 9/2 |
| Fax: +49 89 962428 90 | D - 85737 Ismaning, Germany |
--------------------------------------------------------------------
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
next prev parent reply other threads:[~2003-10-14 12:01 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-14 11:44 Dhawal Mer
2003-10-14 11:58 ` Andrew Lunn
2003-10-14 12:01 ` Eric Doenges [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-10-16 3:24 Dhawal Mer
[not found] <sf8d6247.056@EBGMAIL>
2003-10-15 11:26 ` Eric Doenges
2003-10-15 9:44 Dhawal Mer
[not found] <sf8d54d6.023@EBGMAIL>
2003-10-15 9:13 ` Eric Doenges
2003-10-15 8:37 Dhawal Mer
[not found] <sf8d42b8.006@EBGMAIL>
2003-10-15 7:37 ` Eric Doenges
2003-10-15 7:19 Dhawal Mer
[not found] <sf8d3344.057@EBGMAIL>
2003-10-15 6:48 ` Eric Doenges
2003-10-15 6:19 Dhawal Mer
2003-10-09 3:23 Dhawal Mer
2003-10-08 10:29 Dhawal Mer
2003-10-08 11:53 ` Eric Doenges
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F8BE5CB.7080909@DynaPel.com \
--to=eric.doenges@dynapel.com \
--cc=andrew@lunn.ch \
--cc=ecos-discuss@sources.redhat.com \
--cc=merdn@LNTEBG.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).