From: John Dallaway <jld@ecosentric.com>
To: Ricardo Andrino <ricardo_andrino@web.de>
Cc: ecos-discuss@ecos.sourceware.org
Subject: [ECOS] Re: Run tests
Date: Mon, 01 Dec 2003 10:06:00 -0000 [thread overview]
Message-ID: <3FCB1297.4020803@ecosentric.com> (raw)
In-Reply-To: <200312010916.hB19GTQ24878@mailgate5.cinetic.de>
Ricardo Andrino wrote:
> when i try to run the run tests on my AT91EB40A with the Ecos configuration tool, there is no connection with the board.I think that is used a Remote Serial connection and should be a ARM Angel/Serial connection......How could i configure this ARM ANgel Connection on the ecos graphical configuration tool?
Interaction with the target hardware for the puspose of running tests is
specified in the Tools->Platforms dialog box of the eCos Configration
Tool. It may or may not be possible to create a platform entry to allow
for the running of tests using Angel. However, I would recommend
installing RedBoot into the second half of the Flash (it does not need
to overwrite Angel) and using RedBoot rather than Angel to run the eCos
tests. If you have previously installed eCos 2.0, you should have a full
set of platforms definitions for the eCos 2.0 targets already defined in
your registry. You can clone the GDB commands used for the at91 platform
(EB40) and use them for the EB40A.
> There is files for this board PB-555 from Axión on the CVS or somewhere?
Check out hardware table for board support:
http://ecos.sourceware.org/hardware.html
John Dallaway
eCosCentric Limited
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
next prev parent reply other threads:[~2003-12-01 10:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-01 9:16 [ECOS] " Ricardo Andrino
2003-12-01 10:06 ` John Dallaway [this message]
2003-12-01 11:00 [ECOS] " Ricardo Andrino
2003-12-01 11:15 ` John Dallaway
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3FCB1297.4020803@ecosentric.com \
--to=jld@ecosentric.com \
--cc=ecos-discuss@ecos.sourceware.org \
--cc=ricardo_andrino@web.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).