[ECOS] RedBoot with net support

[Ron Avisa <ravisa@base2software.com>]

In the course of trying to get on latest greatest tools and source
I have switched to the anon-cvs source and the config 2.0 tool.
I am able to build the default package for a cirrus 7xxx board as well as
a cygmon and redboot.

I have been trying to recreate the RedBoot Rom monitor with network support
which comes with the v1.3 shipment under ../loaders/....

When I have selected the Redboot template the Networking options are greyed
out and disabled.
There is some reference to configuring networking using ecosconfig
in an html doc under tcpip/doc. However trying that using configtool
gives me the same conflict errors.
Target: edb7xxx
Template: redboot
Added:
CYGPKG_NET
CYGPKG_IO_ETH_DRIVERS
8 conflict(s):
C CYGPKG_NET, "requires" constraint not satisfied: CYGPKG_IO
C CYGPKG_NET, "requires" constraint not satisfied: CYGPKG_ISOINFRA
C CYGPKG_NET, "requires" constraint not satisfied: CYGINT_ISO_C_TIME_TYPES
C CYGPKG_NET, "requires" constraint not satisfied: CYGINT_ISO_STRERROR
C CYGPKG_NET, "requires" constraint not satisfied: CYGINT_ISO_ERRNO
C CYGPKG_NET, "requires" constraint not satisfied: CYGINT_ISO_ERRNO_CODES
C CYGPKG_NET, "requires" constraint not satisfied: CYGINT_ISO_MALLOC
C CYGPKG_NET, "requires" constraint not
satisfied: CYGBLD_ISO_BSDTYPES_HEADER == "<sys/bsdtypes.h>"
Trying to build the NET target also fails with some uitron errors.
I suspect I've installed or not installed the net package correctly.
My questions are:
1) What else needs to be done besides cvs download of networking? does it
need to happen in a diff dir?
2) How do I build a Redboot ROM monitor with network support?
3) What is the real diff between cygmon and Redboot?
When I built cygmon I got an 80K bin image. When I tried to build Redboot
with a monitor regardless
of the []Behave Like ROM monitor switch my images were 35K and when flashed
did not provide any
command line.

Thanks
Ron Avisa