From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Lewin A.R.W. Edwards" To: Jonathan Larmour Cc: ecos-discuss@sourceware.cygnus.com Subject: Re: [ECOS] gdb/insight questions Date: Wed, 06 Dec 2000 04:13:00 -0000 Message-id: <4.3.2.7.2.20001206065755.00a8bc00@larwe.com> References: <4.3.2.7.2.20001204221133.00abd9b0@larwe.com> <3A2DBD3F.7F671F3@cygnus.co.uk> X-SW-Source: 2000-12/msg00096.html Hi Jonathan, > > Q1: I don't understand where console I/O goes by default; I would have > > assumed to the gdb console but it seems not? My hello world app has a > >Jesper then said "Problem is that GDB hides any output that is not in > >but isn't the problem above that printf() isn't working by default? Or has >Lewin changed the configuration from the default to use haldiag, to serial Well, I did not change anything related to this THAT I KNOW OF, but I have since generated a new "from scratch" .ecc and now printf works like I expected. I guess my configuration was wrong or corrupt. BTW, the config tool seems to be quite unstable when saving .ecc files. It seems to be slightly more stable if one collapses all the controls in the left-hand pane before attempting to save the .ecc. > > Can't find a usable main.tcl in the following directories: > > C:/CYGWIN/TOOLS/share/gdbctl C:/CYGWIN/TOOLS/gdbtcl > > C:/CYGWIN/TOOLS/gdb/gdbtk/library C:/CYGWIN/TOOLS/gdb1.0/gdbtk/library > >I seem to recall this coming up before. Are you using Win98? See my earlier >reply at http://sources.redhat.com/ml/ecos-discuss/2000-10/msg00137.html >which recommends to upgrade both your cygwin and insight versions. Guilty as charged. If this is a known problem and not just my own personal ill karma then I will leave things as they are, I think, rather than trying to wrestle with the whole toolchain issue again. I might downgrade to regular non-insight gdb so I don't have to remember -nw all the time. === Lewin A.R.W. Edwards (Embedded Engineer) Work: http://www.digi-frame.com/ Personal: http://www.zws.com/ and http://www.larwe.com/