From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Lewin A.R.W. Edwards" <larwe@larwe.com>
To: "Paul Pham" <ppham@MIT.EDU>, <ecos-discuss@sourceware.cygnus.com>
Subject: Re: [ECOS] Size of eCos binaries
Date: Fri, 12 Jan 2001 17:55:00 -0000
Message-id: <4.3.2.7.2.20010112205349.00ae93e0@larwe.com>
References: <ELEIIPIOKOBPDLLMNHKJKEBFCBAA.ppham@mit.edu>
X-SW-Source: 2001-01/msg00217.html

>After I built the eCos libraries for the ARM chip using the Windows
>Configuration tool, I tried compiling the example programs (hello, serial,
>etc.) with arm-elf-gcc and the accompanying Makefile. The resulting binaries
>were about 1 MB large. Is this typical, or am doing something wrong?

This is normal and typical. Most of that information is debugging 
information and ELF stuff. When you upload the binary to the target board 
you'll see that the code size is under 128K.

=== Lewin A.R.W. Edwards (Embedded Engineer)
Work: http://www.digi-frame.com/
Personal: http://www.zws.com/ and http://www.larwe.com/

"Und setzet ihr nicht das Leben ein,
Nie wird euch das Leben gewonnen sein."