From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Lewin A.R.W. Edwards" <larwe@larwe.com>
To: ecos-discuss@sources.redhat.com
Subject: [ECOS] ROM startup on EBD7212
Date: Thu, 01 Feb 2001 15:07:00 -0000
Message-id: <4.3.2.7.2.20010201175356.00ab8e10@larwe.com>
X-SW-Source: 2001-02/msg00013.html

I am finally trying to get a flash-bootable version of my OS for a 
standalone demo for an upcoming trade show. I can't be loading this from a 
PC; I need to be able to just turn on the board and have it boot.

Here's what I did:

I set the startup type to ROM.

I changed nothing else in the .ecc; I rebuilt the library, and then built 
my application.

objcopy -O binary bios3.exe bios3.bin

I used the download program to flash that BIN into the board.

Power the board up (after removing the flash-boot jumper) - nothing.

What else do I need to do to make a ROM-bootable application with eCos 1.3.1?
=== Lewin A.R.W. Edwards (Embedded Engineer)
Work: http://www.digi-frame.com/
Personal: http://www.zws.com/ and http://www.larwe.com/

"Und setzet ihr nicht das Leben ein,
Nie wird euch das Leben gewonnen sein."