From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Lewin A.R.W. Edwards" To: , Subject: Re: [ECOS] 2 Questions: File systems & net-1.0b1.epk Date: Tue, 13 Feb 2001 17:19:00 -0000 Message-id: <4.3.2.7.2.20010213200956.00a85360@larwe.com> References: <000001c09629$12f44dc0$2901a8c0@JEFF> X-SW-Source: 2001-02/msg00218.html Hi Jeff, A fellow Australian :) >to know if there is support available for a DOS compatible FAT file system >under ecos. If there is, would it also support storing files on an ATA >flash pc >card and/or compact flash device? I only have a non-answer for you there: I have written such code, but can't release it at this time due to employer restrictions :( The good news is it is pretty simple. Of course some adaptation for specific hardware would be necessary. > Second question topic: I can't seem to unpack the net-1.0b1.epk > tcp/ip >package. I am using cygwin (dll version 1.1.8 I've downloaded everything I There are two answers to this: 1. Although there may be a way to do it from within the admin tool, I haven't found it. Rename the file to net-1.0b1.tar.gz and: gunzip < net-1.0b1.tar.gz | tar xvf - The contents of the directory thus created should be moved into your packages directory inside the eCos repository (/c/progra~1/redhat~1/ecos/packages if you installed to the default location) and you should then use cat or a text editor to append the "pkgadd.db" file that was extracted from the epk to ecos.db (which is in the above directory). 2. The 1.3.1 release you're using is pretty old and you might be better off getting the latest via CVS. However I have had all sorts of problems trying to do anything "tricky" (like, use the latest CVS code!) using Cygwin-hosted tools. YMMV. === Lewin A.R.W. Edwards (Embedded Engineer) Work: http://www.digi-frame.com/ Personal: http://www.zws.com/ and http://www.larwe.com/ "Und setzet ihr nicht das Leben ein, Nie wird euch das Leben gewonnen sein."