* [ECOS] configtool
@ 2004-05-04 17:23 paape
2004-05-04 19:25 ` [ECOS] configtool John Dallaway
0 siblings, 1 reply; 7+ messages in thread
From: paape @ 2004-05-04 17:23 UTC (permalink / raw)
To: ecos-discuss
Hello,
I'm running version 2.0 of the configtool. I have managed to pull the lower
pane of the configuration
window all the way down and can no longer find it so as to re-display the
output window. Is there an
easy way to correct this (e.g resetting to some default layout)?
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ECOS] Re: configtool
2004-05-04 17:23 [ECOS] configtool paape
@ 2004-05-04 19:25 ` John Dallaway
0 siblings, 0 replies; 7+ messages in thread
From: John Dallaway @ 2004-05-04 19:25 UTC (permalink / raw)
To: paape; +Cc: ecos-discuss
paape@Hi-Techniques.com wrote:
> I'm running version 2.0 of the configtool. I have managed to pull the lower
> pane of the configuration
> window all the way down and can no longer find it so as to re-display the
> output window. Is there an
> easy way to correct this (e.g resetting to some default layout)?
You should be able to restore the default window layout by deleting the
following registry keys while the eCos Configuration Tool is _not_ running:
HKEY_CURRENT_USER\Software\eCos Configuration Tool\Window Size
HKEY_CURRENT_USER\Software\eCos Configuration Tool\Window Status
John Dallaway
eCosCentric Limited
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ECOS] Re: configtool
2006-11-17 9:43 ` [ECOS] configtool John Dallaway
@ 2006-11-17 21:06 ` Larry Phillips
0 siblings, 0 replies; 7+ messages in thread
From: Larry Phillips @ 2006-11-17 21:06 UTC (permalink / raw)
To: John Dallaway, ecos-discuss
On 17 Nov 2006 at 9:43, John Dallaway wrote:
> Hi Larry
>
> Larry Phillips wrote:
>
> > I just downloaded the current eCos, and am having the same problem
> > with configtool that I see in a message dated 15 Sep. The error is
> > that every package generates a "This package doesn't have any valid
> > version subdirectories" error.
> >
> > Andrew Lunn replied to that message, telling the OP to go to
> > http://ecoscentric.com/devzone/configtool.shtml and grab the binary
> > from there. Clicking on the link to get the binary results in a
> > "Resource is no longer available!" page.
>
> I will ask our sysadmin to investigate. In the meantime, our configtool
> and ecosconfig snapshot builds are readily accessible via FTP:
>
> ftp://ftp.ecoscentric.com/pub/snapshots/ecosconfig-060710.exe.bz2
> ftp://ftp.ecoscentric.com/pub/snapshots/configtool-060710.exe.bz2
Got it. Thanks John!
--
O Sibili, Si. Ergo Fortibus es in ero.
O Nobili! Deis Trux. Vatis inem? Causen Dux!
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ECOS] Re: configtool
2006-11-17 4:22 [ECOS] configtool Larry Phillips
@ 2006-11-17 9:43 ` John Dallaway
2006-11-17 21:06 ` Larry Phillips
0 siblings, 1 reply; 7+ messages in thread
From: John Dallaway @ 2006-11-17 9:43 UTC (permalink / raw)
To: Larry Phillips; +Cc: ecos-discuss
Hi Larry
Larry Phillips wrote:
> I just downloaded the current eCos, and am having the same problem
> with configtool that I see in a message dated 15 Sep. The error is
> that every package generates a "This package doesn't have any valid
> version subdirectories" error.
>
> Andrew Lunn replied to that message, telling the OP to go to
> http://ecoscentric.com/devzone/configtool.shtml and grab the binary
> from there. Clicking on the link to get the binary results in a
> "Resource is no longer available!" page.
I will ask our sysadmin to investigate. In the meantime, our configtool
and ecosconfig snapshot builds are readily accessible via FTP:
ftp://ftp.ecoscentric.com/pub/snapshots/ecosconfig-060710.exe.bz2
ftp://ftp.ecoscentric.com/pub/snapshots/configtool-060710.exe.bz2
John Dallaway
eCosCentric Limited
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ECOS] Re: configtool
2004-06-25 15:36 ` [ECOS] configtool John Dallaway
@ 2004-06-25 15:52 ` David Lewin
0 siblings, 0 replies; 7+ messages in thread
From: David Lewin @ 2004-06-25 15:52 UTC (permalink / raw)
To: John Dallaway; +Cc: ecos-discuss
Yes I am,
in fact I was : I've found what disturbed configtool :
As I port a flash Package ,I changed the myplatform.cdl
to do a :
implements CYGPKG_DEVS_FLASH_MyFlash
this make configtools shutdown immediately.
Therefore instead of doing an import as told in the documentation (that
fooled me)!!!,
I rather insert my flash package with the package configuration tool.
Thank you John for the proposal.
----- Original Message -----
From: "John Dallaway" <jld@ecoscentric.com>
To: "David Lewin" <david.lewin@europe-technologies.com>
Cc: <ecos-discuss@ecos.sourceware.org>
Sent: Friday, June 25, 2004 5:36 PM
Subject: [ECOS] Re: configtool
> Hi David
>
> If you are able to reproduce a problem you are experiencing with the
> eCos Configuration Tool, please submit a problem report using Bugzilla:
>
> http://bugs.ecos.sourceware.org/
>
> John Dallaway
> eCosCentric Limited
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ECOS] Re: configtool
2004-06-25 10:13 ` [ECOS] configtool David Lewin
@ 2004-06-25 15:36 ` John Dallaway
2004-06-25 15:52 ` David Lewin
0 siblings, 1 reply; 7+ messages in thread
From: John Dallaway @ 2004-06-25 15:36 UTC (permalink / raw)
To: David Lewin; +Cc: ecos-discuss
Hi David
If you are able to reproduce a problem you are experiencing with the
eCos Configuration Tool, please submit a problem report using Bugzilla:
http://bugs.ecos.sourceware.org/
John Dallaway
eCosCentric Limited
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [ECOS] Re: configtool
@ 2004-05-04 20:44 paape
0 siblings, 0 replies; 7+ messages in thread
From: paape @ 2004-05-04 20:44 UTC (permalink / raw)
To: ecos-discuss
Got it!
thanks John
-----Original Message-----
From: John Dallaway [mailto:jld@ecoscentric.com]
Sent: Tuesday, May 04, 2004 2:24 PM
To: paape@hi-techniques.com
Cc: ecos-discuss@ecos.sourceware.org
Subject: [ECOS] Re: configtool
paape@Hi-Techniques.com wrote:
> I'm running version 2.0 of the configtool. I have managed to pull the
lower
> pane of the configuration
> window all the way down and can no longer find it so as to re-display the
> output window. Is there an
> easy way to correct this (e.g resetting to some default layout)?
You should be able to restore the default window layout by deleting the
following registry keys while the eCos Configuration Tool is _not_ running:
HKEY_CURRENT_USER\Software\eCos Configuration Tool\Window Size
HKEY_CURRENT_USER\Software\eCos Configuration Tool\Window Status
John Dallaway
eCosCentric Limited
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
This e-mail was scanned for viruses using BitDefender
Sent by 602Pro LAN SUITE - http://www.software602.com/
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2006-11-17 21:06 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-05-04 17:23 [ECOS] configtool paape
2004-05-04 19:25 ` [ECOS] configtool John Dallaway
2004-05-04 20:44 paape
2004-06-25 8:09 [ECOS] One question anton yakovlev
2004-06-25 10:13 ` [ECOS] configtool David Lewin
2004-06-25 15:36 ` [ECOS] configtool John Dallaway
2004-06-25 15:52 ` David Lewin
2006-11-17 4:22 [ECOS] configtool Larry Phillips
2006-11-17 9:43 ` [ECOS] configtool John Dallaway
2006-11-17 21:06 ` Larry Phillips
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).