From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 19456 invoked by alias); 30 May 2007 16:33:34 -0000 Received: (qmail 19447 invoked by uid 22791); 30 May 2007 16:33:34 -0000 X-Spam-Check-By: sourceware.org Received: from mx27.mail.ru (HELO mx27.mail.ru) (194.67.23.64) by sourceware.org (qpsmtpd/0.31) with ESMTP; Wed, 30 May 2007 16:33:30 +0000 Received: from [90.188.136.17] (port=8085 helo=[192.168.1.2]) by mx27.mail.ru with asmtp id 1HtR71-000A5C-00 for ecos-discuss@ecos.sourceware.org; Wed, 30 May 2007 20:33:27 +0400 Message-ID: <465DA757.1030502@mail.ru> Date: Wed, 30 May 2007 16:54:00 -0000 From: Shusharin Alexey User-Agent: Thunderbird 2.0.0.0 (X11/20070326) MIME-Version: 1.0 To: ecos-discuss@ecos.sourceware.org Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit X-IsSubscribed: yes Mailing-List: contact ecos-discuss-help@ecos.sourceware.org; run by ezmlm Precedence: bulk List-Id: List-Subscribe: List-Archive: List-Post: List-Help: , Sender: ecos-discuss-owner@ecos.sourceware.org Subject: [ECOS] diag_printf via serial port X-SW-Source: 2007-05/txt/msg00178.txt.bz2 Hello all, I have a small question about '/dev/ttydiag'. I'm working with Olimex LPC-E2294 board and port of eCos by Sergei Gavrikov. Then I use a telnet connection with the board (or GDB via ethernet) output to /dev/ttydiag works fine, but it doesn't appear then I use connection via serial port (GDB or minicom). However, then CYGDBG_IO_INIT option is enabled I see I/O drivers debug output via serial connection. Does driver and application diag_printf differ? Should I see application output via serial channel or not? Thanks Best regards Alexey Shusharin -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss