From: Gary Thomas <gary@mlbassoc.com>
To: mahesh waran <maheshurmail@yahoo.com>
Cc: ecos-discuss@ecos.sourceware.org
Subject: Re: [ECOS] Reg: Mass storage Problem
Date: Mon, 17 Sep 2007 11:17:00 -0000 [thread overview]
Message-ID: <46EE624A.5060305@mlbassoc.com> (raw)
In-Reply-To: <699547.77502.qm@web50212.mail.re2.yahoo.com>
mahesh waran wrote:
> Hi Engineers,
>
> Dear all:
>
> When I use the g_file_strogae.ko module, I failed to write big file to the disk.
>
> Hardware platform:
>
> CPU: S3C2440A
>
> SDRAM: 32M sdram
>
> Kernel:2.6.19
>
> processor:AT91SAM9261
>
> I plug a 256MBytes usb flashdisk(fat32 type) into the board usb host
> interface, and connect a usb line between the board usb device interface
> and a PC with WinXP OS.
>
> In the board side, I use the following command:
>
> #> insmod ./g_file_storage.ko file=/dev/sda removable=1
>
> where /dev/sda is the external 256MB flash disk.
>
> Then in the PC side, XP can recognize the board as a usb mass storage
>
> device. And read big file(3Mbytes) is OK.
>
> But when I write a big file(3Mbytes) into the board from XP side, the
> speed is very slow and finally failed. (Write a 3KBytes file is OK). In
> the board side, kernel repeatedly printed following message every
> several seconds. "g_file_storage gadget: full speed config #1".
>
> What's wrong with it?
>
> Regards,
> M.Maheswaran
> system Analyst
>
I doubt you have the right mailing list - this list is for discussions
about eCos, not Linux.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
prev parent reply other threads:[~2007-09-17 11:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-17 4:56 mahesh waran
2007-09-17 11:17 ` Gary Thomas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46EE624A.5060305@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=ecos-discuss@ecos.sourceware.org \
--cc=maheshurmail@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).