* [ECOS] RedBoot on MPC564
@ 2006-02-14 11:32 Azkarate_Askasua Mikel
0 siblings, 0 replies; only message in thread
From: Azkarate_Askasua Mikel @ 2006-02-14 11:32 UTC (permalink / raw)
To: ecos-discuss
Hello everybody,
I get a RedBoot on my Axiom's MPC564EVB board using the existing cme555 port.
Then I make the 'hello world' example with a default template (startup on RAM and work with ROM monitor setting selected), I change the resultant object format to srec and I load it with the RedBoot commands through serial line (yMODEM). The transference seems to be correct, I read back the RAM content where correct programmed values are shown.
But I enter "go" command in the entry point of the loaded section and there is no output.
>Anybody knows what could be happening?
>Is it necessary any other setting to create a bootable image?
>Could the fact of beeing another processor affect?
Thank you very much for your time,
Mikel A-A
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-02-14 11:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-02-14 11:32 [ECOS] RedBoot on MPC564 Azkarate_Askasua Mikel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).