* [ECOS] Network debuggers & diag_printf @ 2008-07-04 15:34 Eduardo Sabaj [not found] ` <d13da2ba633b28b884ee23cf940239ad@tepkom.ru> 0 siblings, 1 reply; 5+ messages in thread From: Eduardo Sabaj @ 2008-07-04 15:34 UTC (permalink / raw) To: ecos-discuss, Eduardo Salvador Sabaj I would like to disable the following debuggers related to the net. I imagine that it may be a simple thing, but I did't work out how to do it... ... [cyg_net_init] Init: mbinit(0x00000000) [cyg_net_init] Init: cyg_net_init_devs(0x00000000) Init device 'r6040_eth0' [cyg_net_init] Init: loopattach(0x00000000) [cyg_net_init] Init: ifinit(0x00000000) [cyg_net_init] Init: domaininit(0x00000000) [cyg_net_init] Init: cyg_net_add_domain(0x0019e1a0) New domain internet at 0x00000000 [cyg_net_init] Init: cyg_net_add_domain(0x0019da40) New domain route at 0x00000000 [cyg_net_init] Init: call_route_init(0x00000000) [cyg_net_init] Done BOOTP[eth0] op: REPLY htype: Ethernet hlen: 6 hops: 0 xid: 0x0 secs: 0 flags: 0x0 hw_addr: 00:1b:eb:74:00:dd client IP: 192.0.2.235 my IP: 192.0.2.235 server IP: 192.0.110.232 gateway IP: 192.0.110.232 options: subnet mask: 255.255.0.0 IP broadcast: 192.0.255.255 gateway: 192.0.110.232 I would also like to know how diag_printf works, since some (or all) of the debuggers listed above were printed by using this function. Could it be disabled by configtool? By the way, I've already unchecked the following MACROS on configtool: - CYGDBG_IO_ETH_DRIVERS_DEBUG - CYGPKG_NET_DEBUG I unchecked also: - I/O sub-system -> Common ethernet support -> RDC R6040 ethernet driver -> Print ethernet device status info during startup - I/O sub-system -> Serial device drivers -> TTY-mode serial device drivers -> Console device name -> "/dev/null" Any idea?? Best Regards Eduardo -- Ing. Eduardo Salvador Sabaj Analista de Desarrollo CompañÃa Hasar | Grupo Hasar* *Marcos Sastre y José Ingenieros El Talar. Pacheco [B1618CSD] Buenos Aires. Argentina Tel [54 11] 4117 8900 | Fax [54 11] 4117 8998 E-mail: esabaj@hasar.com VisÃtenos en: www.hasar.com <http://www.hasar.com>Información legal y polÃtica de confidencialidad: www.grupohasar.com/disclaimer <http://www.grupohasar.com/disclaimer> -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <d13da2ba633b28b884ee23cf940239ad@tepkom.ru>]
* Re: [ECOS] Network debuggers & diag_printf [not found] ` <d13da2ba633b28b884ee23cf940239ad@tepkom.ru> @ 2008-07-04 17:59 ` Eduardo Sabaj 2008-07-04 18:19 ` Rob Duncan [not found] ` <be72a610807041106w72034b70n8fd5e7fc27b04964@mail.gmail.com> 0 siblings, 2 replies; 5+ messages in thread From: Eduardo Sabaj @ 2008-07-04 17:59 UTC (permalink / raw) To: Andrey Baboshin, ecos-discuss Thank you Andrey for your mail.. I could disable some but not all of the debuggers. Now I have the following information that is coming out from the serial port (COM1): BOOTP[eth0] op: REPLY htype: Ethernet hlen: 6 hops: 0 xid: 0x0 secs: 0 flags: 0x0 hw_addr: 00:1b:eb:74:00:dd client IP: 192.0.2.235 my IP: 192.0.2.235 server IP: 192.0.110.232 gateway IP: 192.0.110.232 options: subnet mask: 255.255.0.0 IP broadcast: 192.0.255.255 gateway: 192.0.110.232 These lines are printed using diag_printf () in module bootp_support.c, function show_bootp(). Instead of commenting the code I would like to know if there is a way to disable the diag_printf () function, at least for the code related to the network settings. Any idea? Regards Eduardo Andrey Baboshin escribió: > Hi, > > You can try to disable CYGPKG_NET_FREEBSD_LOGGING (for freebsd tcp/ip > stack). > Just say > cdl_option CYGPKG_NET_FREEBSD_LOGGING { > user_value 0 > }; > in your *.ecm file. > For full information make a look of freebsd_net.cdl file. > > On Fri, 04 Jul 2008 12:33:58 -0300, Eduardo Sabaj <esabaj@hasar.com> wrote: > >> I would like to disable the following debuggers related to the net. I >> imagine that it may be a simple thing, but I did't work out how to do >> it... >> >> > > --- > Andrey Baboshin > > > > -- Ing. Eduardo Salvador Sabaj Analista de Desarrollo CompañÃa Hasar | Grupo Hasar* *Marcos Sastre y José Ingenieros El Talar. Pacheco [B1618CSD] Buenos Aires. Argentina Tel [54 11] 4117 8900 | Fax [54 11] 4117 8998 E-mail: esabaj@hasar.com VisÃtenos en: www.hasar.com <http://www.hasar.com>Información legal y polÃtica de confidencialidad: www.grupohasar.com/disclaimer <http://www.grupohasar.com/disclaimer> -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ECOS] Network debuggers & diag_printf 2008-07-04 17:59 ` Eduardo Sabaj @ 2008-07-04 18:19 ` Rob Duncan [not found] ` <be72a610807041106w72034b70n8fd5e7fc27b04964@mail.gmail.com> 1 sibling, 0 replies; 5+ messages in thread From: Rob Duncan @ 2008-07-04 18:19 UTC (permalink / raw) To: ecos-discuss Eduardo, On 7/4/08, Eduardo Sabaj <esabaj@hasar.com> wrote: > BOOTP[eth0] op: REPLY > htype: Ethernet > hlen: 6 > hops: 0 > xid: 0x0 > secs: 0 > flags: 0x0 > hw_addr: 00:1b:eb:74:00:dd > client IP: 192.0.2.235 > my IP: 192.0.2.235 > server IP: 192.0.110.232 > gateway IP: 192.0.110.232 > options: > subnet mask: 255.255.0.0 > IP broadcast: 192.0.255.255 > gateway: 192.0.110.232 > > These lines are printed using diag_printf () in module bootp_support.c, > function show_bootp(). Instead of commenting the code I would like to know > if there is a way to disable the diag_printf () function, at least for the > code related to the network settings. Try setting the CYGHWR_NET_DRIVER_ETH0_BOOTP_SHOW option to 0. Rob. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <be72a610807041106w72034b70n8fd5e7fc27b04964@mail.gmail.com>]
* Re: [ECOS] Network debuggers & diag_printf [not found] ` <be72a610807041106w72034b70n8fd5e7fc27b04964@mail.gmail.com> @ 2008-07-04 19:28 ` Eduardo Sabaj 2008-07-04 21:41 ` Rob Duncan 0 siblings, 1 reply; 5+ messages in thread From: Eduardo Sabaj @ 2008-07-04 19:28 UTC (permalink / raw) To: Rob Duncan; +Cc: Andrey Baboshin, ecos-discuss Hi Rob, I tried what you suggested but I had no success... Any other idea? Regards Eduardo Rob Duncan escribió: > Try setting the CYGHWR_NET_DRIVER_ETH0_BOOTP_SHOW option to 0. > > Rob. > > On 7/4/08, Eduardo Sabaj <esabaj@hasar.com> wrote: > >> Thank you Andrey for your mail.. I could disable some but not all of the >> debuggers. Now I have the following information that is coming out from the >> serial port (COM1): >> >> BOOTP[eth0] op: REPLY >> htype: Ethernet >> hlen: 6 >> hops: 0 >> xid: 0x0 >> secs: 0 >> flags: 0x0 >> hw_addr: 00:1b:eb:74:00:dd >> client IP: 192.0.2.235 >> my IP: 192.0.2.235 >> server IP: 192.0.110.232 >> gateway IP: 192.0.110.232 >> options: >> subnet mask: 255.255.0.0 >> IP broadcast: 192.0.255.255 >> gateway: 192.0.110.232 >> >> These lines are printed using diag_printf () in module bootp_support.c, >> function show_bootp(). Instead of commenting the code I would like to know >> if there is a way to disable the diag_printf () function, at least for the >> code related to the network settings. >> >> Any idea? >> >> Regards >> Eduardo >> >> >> Andrey Baboshin escribió: >> >> >>> Hi, >>> You can try to disable CYGPKG_NET_FREEBSD_LOGGING (for freebsd tcp/ip >>> stack). >>> Just say cdl_option CYGPKG_NET_FREEBSD_LOGGING { >>> user_value 0 >>> }; >>> in your *.ecm file. >>> For full information make a look of freebsd_net.cdl file. >>> >>> On Fri, 04 Jul 2008 12:33:58 -0300, Eduardo Sabaj <esabaj@hasar.com> >>> >> wrote: >> >>> >>>> I would like to disable the following debuggers related to the net. I >>>> imagine that it may be a simple thing, but I did't work out how to do >>>> it... >>>> >>>> >>>> >>>> >>> --- >>> Andrey Baboshin >>> >>> >>> >>> >>> >>> >> -- >> >> Ing. Eduardo Salvador Sabaj >> Analista de Desarrollo >> >> CompañÃa Hasar | Grupo Hasar* >> *Marcos Sastre y José Ingenieros >> El Talar. Pacheco >> [B1618CSD] Buenos Aires. Argentina >> Tel [54 11] 4117 8900 | Fax [54 11] 4117 8998 >> E-mail: esabaj@hasar.com >> VisÃtenos en: www.hasar.com >> <http://www.hasar.com>Información legal y polÃtica de confidencialidad: >> www.grupohasar.com/disclaimer >> <http://www.grupohasar.com/disclaimer> >> >> >> -- >> Before posting, please read the FAQ: >> http://ecos.sourceware.org/fom/ecos >> and search the list archive: >> http://ecos.sourceware.org/ml/ecos-discuss >> >> >> > > > -- Ing. Eduardo Salvador Sabaj Analista de Desarrollo CompañÃa Hasar | Grupo Hasar* *Marcos Sastre y José Ingenieros El Talar. Pacheco [B1618CSD] Buenos Aires. Argentina Tel [54 11] 4117 8900 | Fax [54 11] 4117 8998 E-mail: esabaj@hasar.com VisÃtenos en: www.hasar.com <http://www.hasar.com>Información legal y polÃtica de confidencialidad: www.grupohasar.com/disclaimer <http://www.grupohasar.com/disclaimer> -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ECOS] Network debuggers & diag_printf 2008-07-04 19:28 ` Eduardo Sabaj @ 2008-07-04 21:41 ` Rob Duncan 0 siblings, 0 replies; 5+ messages in thread From: Rob Duncan @ 2008-07-04 21:41 UTC (permalink / raw) To: Eduardo Sabaj; +Cc: ecos-discuss Hi Eduardo, On 7/4/08, Eduardo Sabaj <esabaj@hasar.com> wrote: > Hi Rob, I tried what you suggested but I had no success... > Any other idea? Did you regenerate the headers with "ecosconfig tree" after setting the option? You can check by looking in install/include/pkgconf/net.h By default the CYGHWR_NET_DRIVER_ETH0_BOOTP_SHOW symbol is defined there, but if you set the option to 0 and regenerate the tree it will be omitted. Rob. > Rob Duncan escribió: > > Try setting the CYGHWR_NET_DRIVER_ETH0_BOOTP_SHOW option > to 0. > > > > Rob. > > > > On 7/4/08, Eduardo Sabaj <esabaj@hasar.com> wrote: > > > > > > > Thank you Andrey for your mail.. I could disable some but not all of the > > > debuggers. Now I have the following information that is coming out from > the > > > serial port (COM1): > > > > > > BOOTP[eth0] op: REPLY > > > htype: Ethernet > > > hlen: 6 > > > hops: 0 > > > xid: 0x0 > > > secs: 0 > > > flags: 0x0 > > > hw_addr: 00:1b:eb:74:00:dd > > > client IP: 192.0.2.235 > > > my IP: 192.0.2.235 > > > server IP: 192.0.110.232 > > > gateway IP: 192.0.110.232 > > > options: > > > subnet mask: 255.255.0.0 > > > IP broadcast: 192.0.255.255 > > > gateway: 192.0.110.232 > > > > > > These lines are printed using diag_printf () in module bootp_support.c, > > > function show_bootp(). Instead of commenting the code I would like to > know > > > if there is a way to disable the diag_printf () function, at least for > the > > > code related to the network settings. > > > > > > Any idea? > > > > > > Regards > > > Eduardo > > > > > > > > > Andrey Baboshin escribió: > > > > > > > > > > > > > Hi, > > > > You can try to disable CYGPKG_NET_FREEBSD_LOGGING (for freebsd tcp/ip > > > > stack). > > > > Just say cdl_option CYGPKG_NET_FREEBSD_LOGGING { > > > > user_value 0 > > > > }; > > > > in your *.ecm file. > > > > For full information make a look of freebsd_net.cdl file. > > > > > > > > On Fri, 04 Jul 2008 12:33:58 -0300, Eduardo Sabaj <esabaj@hasar.com> > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > I would like to disable the following debuggers related to the net. > I > > > > > imagine that it may be a simple thing, but I did't work out how to > do > > > > > it... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > Andrey Baboshin -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-07-04 21:41 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2008-07-04 15:34 [ECOS] Network debuggers & diag_printf Eduardo Sabaj [not found] ` <d13da2ba633b28b884ee23cf940239ad@tepkom.ru> 2008-07-04 17:59 ` Eduardo Sabaj 2008-07-04 18:19 ` Rob Duncan [not found] ` <be72a610807041106w72034b70n8fd5e7fc27b04964@mail.gmail.com> 2008-07-04 19:28 ` Eduardo Sabaj 2008-07-04 21:41 ` Rob Duncan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).