[ECOS] emboslab update ecos's code to arm qemu and synthetic

[ECOS] emboslab update ecos's code to arm qemu and synthetic

[ricky wu]

Dear all:

We have update ecos code to MINI2440 QEMU and synthetic

http://emboslab.hg.sourceforge.net/hgweb/emboslab/ecos-emboslab/rev/9fcc1bff0f13

1. add touch driver for MINI2440 qemu.
2. add touch driver for synthetic
3. add new graphics library flnx (FLTK for nano-x) as an ecos package
4. fix microwindows nano-x issue, now can be run on MINI2440 QEMU or
synthetic platform
5. enable microwindows MWIN function
6. add pw graphics library
7. add PNG library
8. add jpeg-6b library
9. fix mini2440 qemu lcd driver color issue

-- 
Ricky Wu

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

RE: [ECOS] emboslab update ecos's code to arm qemu and synthetic

[Christophe Coutand]

Hi Ricky,

Thanks for the update. Are all the graphic libraries in services\gfx\*
safe to use in commercial products or are there any special licenses to
be careful about?

Christophe


-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of ricky wu
Sent: 8. april 2011 10:53
To: eCos Disuss
Subject: [ECOS] emboslab update ecos's code to arm qemu and synthetic

Dear all:

We have update ecos code to MINI2440 QEMU and synthetic

http://emboslab.hg.sourceforge.net/hgweb/emboslab/ecos-emboslab/rev/9fcc
1bff0f13

1. add touch driver for MINI2440 qemu.
2. add touch driver for synthetic
3. add new graphics library flnx (FLTK for nano-x) as an ecos package
4. fix microwindows nano-x issue, now can be run on MINI2440 QEMU or
synthetic platform
5. enable microwindows MWIN function
6. add pw graphics library
7. add PNG library
8. add jpeg-6b library
9. fix mini2440 qemu lcd driver color issue

-- 
Ricky Wu

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Re: [ECOS] emboslab update ecos's code to arm qemu and synthetic

[Stanislav Meduna]

On 08.04.2011 10:53, ricky wu wrote:

> We have update ecos code to MINI2440 QEMU and synthetic

Are you also using a real Mini2440 hardware? If yes, are you
using flash and if yes, how?

NAND is not in the mainstream and NOR is severely out of spec
and basically unusable for anything but booting (see
http://ecos.sourceware.org/ml/ecos-discuss/2011-02/msg00019.html)

In any case, thanks for the work.

Regards
-- 
                                       Stano

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] Re: emboslab update ecos's code to arm qemu and synthetic

[ricky wu]

Dear all:

If we make a patch for ecos cvs version, can I push some may changes
as a only one patch?

2011/4/8 ricky wu <rickleaf.wu@gmail.com>:
> Dear all:
>
> We have update ecos code to MINI2440 QEMU and synthetic
>
> http://emboslab.hg.sourceforge.net/hgweb/emboslab/ecos-emboslab/rev/9fcc1bff0f13
>
> 1. add touch driver for MINI2440 qemu.
> 2. add touch driver for synthetic
> 3. add new graphics library flnx (FLTK for nano-x) as an ecos package
> 4. fix microwindows nano-x issue, now can be run on MINI2440 QEMU or
> synthetic platform
> 5. enable microwindows MWIN function
> 6. add pw graphics library
> 7. add PNG library
> 8. add jpeg-6b library
> 9. fix mini2440 qemu lcd driver color issue
>
> --
> Ricky Wu
>



-- 
Ricky Wu

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] Re: emboslab update ecos's code to arm qemu and synthetic

[ricky wu]

Dear all:

If we make a patch for ecos cvs version, can I put so may changes
into the only one patch?

2011/4/8 ricky wu <rickleaf.wu@gmail.com>:
> Dear all:
>
> We have update ecos code to MINI2440 QEMU and synthetic
>
> http://emboslab.hg.sourceforge.net/hgweb/emboslab/ecos-emboslab/rev/9fcc1bff0f13
>
> 1. add touch driver for MINI2440 qemu.
> 2. add touch driver for synthetic
> 3. add new graphics library flnx (FLTK for nano-x) as an ecos package
> 4. fix microwindows nano-x issue, now can be run on MINI2440 QEMU or
> synthetic platform
> 5. enable microwindows MWIN function
> 6. add pw graphics library
> 7. add PNG library
> 8. add jpeg-6b library
> 9. fix mini2440 qemu lcd driver color issue
>
> --
> Ricky Wu
>



-- 
Ricky Wu

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] Re: emboslab update ecos's code to arm qemu and synthetic

[ricky wu]

You can get the source code :
hg clone http://emboslab.hg.sourceforge.net:8000/hgroot/emboslab/ecos-emboslab

2011/4/11 ricky wu <rickleaf.wu@gmail.com>:
> Dear all:
>
> If we make a patch for ecos cvs version, can I put so may changes
> into the only one patch?
>
> 2011/4/8 ricky wu <rickleaf.wu@gmail.com>:
>> Dear all:
>>
>> We have update ecos code to MINI2440 QEMU and synthetic
>>
>> http://emboslab.hg.sourceforge.net/hgweb/emboslab/ecos-emboslab/rev/9fcc1bff0f13
>>
>> 1. add touch driver for MINI2440 qemu.
>> 2. add touch driver for synthetic
>> 3. add new graphics library flnx (FLTK for nano-x) as an ecos package
>> 4. fix microwindows nano-x issue, now can be run on MINI2440 QEMU or
>> synthetic platform
>> 5. enable microwindows MWIN function
>> 6. add pw graphics library
>> 7. add PNG library
>> 8. add jpeg-6b library
>> 9. fix mini2440 qemu lcd driver color issue
>>
>> --
>> Ricky Wu
>>
>
>
>
> --
> Ricky Wu
>



-- 
Ricky Wu

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss