* [ECOS] eCos problem: if_lancepci.c does not compile for i386 (vmWare)
@ 2009-08-24 8:12 Waskita Adijarto
2009-08-24 11:36 ` [ECOS] Ethernet controllers Jim Bradleigh
0 siblings, 1 reply; 6+ messages in thread
From: Waskita Adijarto @ 2009-08-24 8:12 UTC (permalink / raw)
To: ecos-discuss
I've just found problem compiling if_lancepci.c under eCos. After
googling , I found similar problem in the archive here:
http://www.mail-archive.com/ecos-discuss@ecos.sourceware.org/msg09854.html.
I used similar new gnutools
(ecoscentric-gnutools-i386-elf-20081107-sw.cygwin.tar.bz2)
I experienced this problem while compiling eCos 3.0 and 1.0.8 (from
gaisler) in cygwin
Tool chain version:
$ i386-elf-gcc -v
Using built-in specs.
Target: i386-elf
Configured with: /gnutools/src/toolchains/gcc/gcc-4.3.2/configure -v --target=i386-elf --prefix=/gnutools/builds/toolchains/i386-elf/tools --with-newlib --with-gnu-as --with-gnu-ld --enable-languages=c,c++ --disable-__cxa_atexit --enable-threads --with-bugurl=http://bugs.ecos.sourceware.org/ --with-pkgversion='eCosCentric GNU tools 4.3.2-sw'
Thread model: single
gcc version 4.3.2 (eCosCentric GNU tools 4.3.2-sw)
My solution: use old gnutools
(ecoscentric-gnutools-i386-elf-1.4-2.cygwin.tar.bz2) . The problem goes
away.
tool chain version:
$ i386-elf-gcc -v
Reading specs from /opt/gnutools/i386-elf/bin/../lib/gcc-lib/i386-elf/3.2.1/specs
Configured with: /local/demonweb/tools/ecos-gnutools-v1.4/r2/i386-elf/cygwin/tar_bz2/source/gcc-3.2.1/configure --target=i386-elf --prefix=/local/demonweb/tools/ecos-gnutools-v1.4/r2/i386-elf/cygwin/tar_bz2/opt/ecos/gnutools/i386-elf --enable-languages=c,c++ --with-gnu-as --with-gnu-ld --with-newlib --with-gxx-include-dir=/local/demonweb/tools/ecos-gnutools-v1.4/r2/i386-elf/cygwin/tar_bz2/opt/ecos/gnutools/i386-elf/i386-elf/include
Thread model: single
gcc version 3.2.1
I wonder why gcc 4.3.2 behave so different than 3.2.1
-waskita-
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ECOS] Ethernet controllers..
2009-08-24 8:12 [ECOS] eCos problem: if_lancepci.c does not compile for i386 (vmWare) Waskita Adijarto
@ 2009-08-24 11:36 ` Jim Bradleigh
2009-08-24 12:35 ` [ECOS] " John Dallaway
0 siblings, 1 reply; 6+ messages in thread
From: Jim Bradleigh @ 2009-08-24 11:36 UTC (permalink / raw)
To: ecos-discuss
Hi,
Thought I would throw this out to the list to see if anyone can help...
As everyone know's eCos supports a limited device driver list for each platform, I`m currently running on i386 which limits me to a real-tek and two Intel chipsets...
Where do most of you purchase network controllers from? I can`t find any network cards which say they contain the Intel i82544 chipset.. It would be nice to start my project with a defined hardware spec that I know I can purchase..
One other question, does anyone know if a network card with the Marvell 88E1111 chipset exists?
Thanks,
Jim
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ECOS] Re: Ethernet controllers..
2009-08-24 11:36 ` [ECOS] Ethernet controllers Jim Bradleigh
@ 2009-08-24 12:35 ` John Dallaway
2009-08-24 15:23 ` Jim Bradleigh
0 siblings, 1 reply; 6+ messages in thread
From: John Dallaway @ 2009-08-24 12:35 UTC (permalink / raw)
To: Jim Bradleigh; +Cc: ecos-discuss
Hi Jim
Jim Bradleigh wrote:
> Thought I would throw this out to the list to see if anyone can help...
>
> As everyone know's eCos supports a limited device driver list for each
> platform, I`m currently running on i386 which limits me to a real-tek
> and two Intel chipsets...
>
> Where do most of you purchase network controllers from?
The easiest route is probably a D-Link DFE-530TX+ PCI card which uses
the RTL8139 part and can be found via Amazon in the UK.
> I can`t find
> any network cards which say they contain the Intel i82544 chipset.. It
> would be nice to start my project with a defined hardware spec that I
> know I can purchase..
The i82544 featured on the Intel Pro/1000 ethernet card which appears to
have been replaced by the Pro/1000 GT card:
http://www.intel.com/products/desktop/adapters/pro1000gt/pro1000gt-overview.htm
The newer card uses the i82541 part which may or may not be compatible.
> One other question, does anyone know if a network card with the Marvell
> 88E1111 chipset exists?
The 88E1111 is an ethernet PHY (transceiver), not a controller.
I hope this helps.
John Dallaway
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Re: Ethernet controllers..
2009-08-24 12:35 ` [ECOS] " John Dallaway
@ 2009-08-24 15:23 ` Jim Bradleigh
2009-08-24 15:33 ` Gary Thomas
0 siblings, 1 reply; 6+ messages in thread
From: Jim Bradleigh @ 2009-08-24 15:23 UTC (permalink / raw)
To: John Dallaway; +Cc: ecos-discuss
Hi John,
Thanks for the update, I`m currently using RTL8139 based cards but my project requires alot of performance from the network elements and eventually Gigabit Ethernet..
In this reguard I`ll have to look into Intel cards sooner or later, can anyone tell me why the Intel 82544 driver uses the function "udelay" alot - I`m concerned that the udelay is a hardware delay which will prevent threads (or other 82544 cards in the system) from running.
Jim
----- Original Message ----
From: John Dallaway <john@dallaway.org.uk>
To: Jim Bradleigh <jim.bradleigh1@btinternet.com>
Cc: ecos-discuss@ecos.sourceware.org
Sent: Monday, 24 August, 2009 1:35:09 PM
Subject: [ECOS] Re: Ethernet controllers..
Hi Jim
Jim Bradleigh wrote:
> Thought I would throw this out to the list to see if anyone can help...
>
> As everyone know's eCos supports a limited device driver list for each
> platform, I`m currently running on i386 which limits me to a real-tek
> and two Intel chipsets...
>
> Where do most of you purchase network controllers from?
The easiest route is probably a D-Link DFE-530TX+ PCI card which uses
the RTL8139 part and can be found via Amazon in the UK.
> I can`t find
> any network cards which say they contain the Intel i82544 chipset.. It
> would be nice to start my project with a defined hardware spec that I
> know I can purchase..
The i82544 featured on the Intel Pro/1000 ethernet card which appears to
have been replaced by the Pro/1000 GT card:
http://www.intel.com/products/desktop/adapters/pro1000gt/pro1000gt-overview.htm
The newer card uses the i82541 part which may or may not be compatible.
> One other question, does anyone know if a network card with the Marvell
> 88E1111 chipset exists?
The 88E1111 is an ethernet PHY (transceiver), not a controller.
I hope this helps.
John Dallaway
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Re: Ethernet controllers..
2009-08-24 15:23 ` Jim Bradleigh
@ 2009-08-24 15:33 ` Gary Thomas
2009-08-24 15:59 ` Jim Bradleigh
0 siblings, 1 reply; 6+ messages in thread
From: Gary Thomas @ 2009-08-24 15:33 UTC (permalink / raw)
To: Jim Bradleigh; +Cc: John Dallaway, ecos-discuss
Jim Bradleigh wrote:
> Hi John,
>
> Thanks for the update, I`m currently using RTL8139 based cards but my project requires alot of performance from the network elements and eventually Gigabit Ethernet..
>
> In this reguard I`ll have to look into Intel cards sooner or later, can anyone tell me why the Intel 82544 driver uses the function "udelay" alot - I`m concerned that the udelay is a hardware delay which will prevent threads (or other 82544 cards in the system) from running.
None of the uses of udelay are in the main processing path - only
during initialization.
> ----- Original Message ----
> From: John Dallaway <john@dallaway.org.uk>
> To: Jim Bradleigh <jim.bradleigh1@btinternet.com>
> Cc: ecos-discuss@ecos.sourceware.org
> Sent: Monday, 24 August, 2009 1:35:09 PM
> Subject: [ECOS] Re: Ethernet controllers..
>
> Hi Jim
>
> Jim Bradleigh wrote:
>
>> Thought I would throw this out to the list to see if anyone can help...
>>
>> As everyone know's eCos supports a limited device driver list for each
>> platform, I`m currently running on i386 which limits me to a real-tek
>> and two Intel chipsets...
>>
>> Where do most of you purchase network controllers from?
>
> The easiest route is probably a D-Link DFE-530TX+ PCI card which uses
> the RTL8139 part and can be found via Amazon in the UK.
>
>> I can`t find
>> any network cards which say they contain the Intel i82544 chipset.. It
>> would be nice to start my project with a defined hardware spec that I
>> know I can purchase..
>
> The i82544 featured on the Intel Pro/1000 ethernet card which appears to
> have been replaced by the Pro/1000 GT card:
>
> http://www.intel.com/products/desktop/adapters/pro1000gt/pro1000gt-overview.htm
>
> The newer card uses the i82541 part which may or may not be compatible.
>
>> One other question, does anyone know if a network card with the Marvell
>> 88E1111 chipset exists?
>
> The 88E1111 is an ethernet PHY (transceiver), not a controller.
>
> I hope this helps.
>
> John Dallaway
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Re: Ethernet controllers..
2009-08-24 15:33 ` Gary Thomas
@ 2009-08-24 15:59 ` Jim Bradleigh
0 siblings, 0 replies; 6+ messages in thread
From: Jim Bradleigh @ 2009-08-24 15:59 UTC (permalink / raw)
To: Gary Thomas; +Cc: John Dallaway, ecos-discuss
Hi Gary,
If bring up the network cards using my own processes (as I currently do with a "custom" RTK 8139 driver) how would I go about replacing the udelay's with a more thread friendly process? Just a matter of "cyg_thread_delay" instead?
As previous described I only use eth0 with the FreeBSD stack, the other two ethernet ports are spoke to directly by my application and I just want to avoid any pitfall early on when I have to brief the powers that be in my work...
Thanks,
Jim
----- Original Message ----
From: Gary Thomas <gary@mlbassoc.com>
To: Jim Bradleigh <jim.bradleigh1@btinternet.com>
Cc: John Dallaway <john@dallaway.org.uk>; ecos-discuss@ecos.sourceware.org
Sent: Monday, 24 August, 2009 4:33:06 PM
Subject: Re: [ECOS] Re: Ethernet controllers..
Jim Bradleigh wrote:
> Hi John,
>
> Thanks for the update, I`m currently using RTL8139 based cards but my project requires alot of performance from the network elements and eventually Gigabit Ethernet..
>
> In this reguard I`ll have to look into Intel cards sooner or later, can anyone tell me why the Intel 82544 driver uses the function "udelay" alot - I`m concerned that the udelay is a hardware delay which will prevent threads (or other 82544 cards in the system) from running.
None of the uses of udelay are in the main processing path - only
during initialization.
> ----- Original Message ----
> From: John Dallaway <john@dallaway.org.uk>
> To: Jim Bradleigh <jim.bradleigh1@btinternet.com>
> Cc: ecos-discuss@ecos.sourceware.org
> Sent: Monday, 24 August, 2009 1:35:09 PM
> Subject: [ECOS] Re: Ethernet controllers..
>
> Hi Jim
>
> Jim Bradleigh wrote:
>
>> Thought I would throw this out to the list to see if anyone can help...
>>
>> As everyone know's eCos supports a limited device driver list for each
>> platform, I`m currently running on i386 which limits me to a real-tek
>> and two Intel chipsets...
>>
>> Where do most of you purchase network controllers from?
>
> The easiest route is probably a D-Link DFE-530TX+ PCI card which uses
> the RTL8139 part and can be found via Amazon in the UK.
>
>> I can`t find
>> any network cards which say they contain the Intel i82544 chipset.. It
>> would be nice to start my project with a defined hardware spec that I
>> know I can purchase..
>
> The i82544 featured on the Intel Pro/1000 ethernet card which appears to
> have been replaced by the Pro/1000 GT card:
>
> http://www.intel.com/products/desktop/adapters/pro1000gt/pro1000gt-overview.htm
>
> The newer card uses the i82541 part which may or may not be compatible.
>
>> One other question, does anyone know if a network card with the Marvell
>> 88E1111 chipset exists?
>
> The 88E1111 is an ethernet PHY (transceiver), not a controller.
>
> I hope this helps.
>
> John Dallaway
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-08-24 15:59 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-08-24 8:12 [ECOS] eCos problem: if_lancepci.c does not compile for i386 (vmWare) Waskita Adijarto
2009-08-24 11:36 ` [ECOS] Ethernet controllers Jim Bradleigh
2009-08-24 12:35 ` [ECOS] " John Dallaway
2009-08-24 15:23 ` Jim Bradleigh
2009-08-24 15:33 ` Gary Thomas
2009-08-24 15:59 ` Jim Bradleigh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).