* [ECOS] wget problem for the Proxy @ 2006-07-06 16:04 Fischetti Antonio 2006-07-06 16:34 ` Grant Mills 0 siblings, 1 reply; 6+ messages in thread From: Fischetti Antonio @ 2006-07-06 16:04 UTC (permalink / raw) To: ecos-discuss I'm can't download with wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl It says "Unresolved Host". I am under a proxy. Do I need a special version of wget. Sort of 'socks' style? Thanx. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] wget problem for the Proxy 2006-07-06 16:04 [ECOS] wget problem for the Proxy Fischetti Antonio @ 2006-07-06 16:34 ` Grant Mills [not found] ` <d32f14c80607070118j6e204780q80e00c28d280b7ec@mail.gmail.com> 0 siblings, 1 reply; 6+ messages in thread From: Grant Mills @ 2006-07-06 16:34 UTC (permalink / raw) To: Fischetti Antonio; +Cc: ecos-discuss Find and edit .wgetrc Set the proxies. There is one for http and one for ftp: http_proxy = ftp_proxy = Don't forget to enable the proxies either: use_proxy = on This may be of little use if your ftp proxy server does not conform to what wget supports. NcFTP and FileZilla both have much broader support for proxy servers. On 7/6/06, Fischetti Antonio <antonio.fischetti@gmail.com> wrote: > I'm can't download with > wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > > It says "Unresolved Host". > I am under a proxy. > Do I need a special version of wget. Sort of 'socks' style? > > Thanx. > > -- > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss > > -- Grant Mills gmills@ucsd.edu -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <d32f14c80607070118j6e204780q80e00c28d280b7ec@mail.gmail.com>]
* [ECOS] Re: Re: wget problem for the Proxy [not found] ` <d32f14c80607070118j6e204780q80e00c28d280b7ec@mail.gmail.com> @ 2006-07-07 8:24 ` Fischetti Antonio 2006-07-07 8:34 ` Alex Schuilenburg 0 siblings, 1 reply; 6+ messages in thread From: Fischetti Antonio @ 2006-07-07 8:24 UTC (permalink / raw) To: ecos-discuss Hi, it seems it improved a bit. My 'wgetrc' file now looks like (I replaced the real Proxy name, IP and port with <proxy_name>, <IP_proxy_addr>, and <port_number>) ______________ http_proxy = <proxy_name>:<port_number> ftp_proxy = <proxy_name>:<port_number> use_proxy = on ______________ This is what gets displayed on my Cygwin window ______________ $ wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl --10:05:41-- ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl => `ecos-install.tcl.1' Resolving <proxy_name>... <IP_proxy_addr> Connecting to <proxy_name>|<IP_proxy_addr>|:<port_number>... connected. Proxy request sent, awaiting response... 407 Proxy Authentication Required 10:05:41 ERROR 407: Proxy Authentication Required. ______________ And it stops. When I usually connect to the proxy (i.e. to surf the web) I provide a username and password. How can I add Username/password to 'wgetrc'? Or is there anything else to be done? Thanx alot, Antonio. On 7/6/06, Grant Mills <gmills@ucsd.edu> wrote: > Find and edit .wgetrc > > Set the proxies. There is one for http and one for ftp: > > http_proxy = > ftp_proxy = > > Don't forget to enable the proxies either: > > use_proxy = on > > This may be of little use if your ftp proxy server does not conform to > what wget supports. NcFTP and FileZilla both have much broader > support for proxy servers. > > On 7/6/06, Fischetti Antonio <antonio.fischetti@gmail.com> wrote: > > I'm can't download with > > wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > > > > It says "Unresolved Host". > > I am under a proxy. > > Do I need a special version of wget. Sort of 'socks' style? > > > > Thanx. > > > > -- > > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos > > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss > > > > > > > -- > Grant Mills > gmills@ucsd.edu > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Re: Re: wget problem for the Proxy 2006-07-07 8:24 ` [ECOS] Re: " Fischetti Antonio @ 2006-07-07 8:34 ` Alex Schuilenburg 2006-07-07 11:40 ` [ECOS] " Fischetti Antonio 2006-07-07 15:31 ` [ECOS] Re: Re: " Fischetti Antonio 0 siblings, 2 replies; 6+ messages in thread From: Alex Schuilenburg @ 2006-07-07 8:34 UTC (permalink / raw) To: Fischetti Antonio; +Cc: ecos-discuss Fischetti Antonio wrote: > Hi, it seems it improved a bit. > My 'wgetrc' file now looks like (I replaced the real Proxy name, IP > and port with > <proxy_name>, <IP_proxy_addr>, and <port_number>) > > ______________ > > http_proxy = <proxy_name>:<port_number> > ftp_proxy = <proxy_name>:<port_number> > use_proxy = on > ______________ > > > This is what gets displayed on my Cygwin window > ______________ > $ wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > --10:05:41-- ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > => `ecos-install.tcl.1' > Resolving <proxy_name>... <IP_proxy_addr> > Connecting to <proxy_name>|<IP_proxy_addr>|:<port_number>... connected. > Proxy request sent, awaiting response... 407 Proxy Authentication > Required > 10:05:41 ERROR 407: Proxy Authentication Required. > ______________ > > And it stops. > When I usually connect to the proxy (i.e. to surf the web) I provide a > username and password. How can I add Username/password to 'wgetrc'? Or > is there anything else to be done? Also add to .wgetrc proxy_user = proxy_passwd = -- Alex Managing Director / CEO eCosCentric Limited http://www.ecoscentric.com/ The eCos and RedBoot experts > > > Thanx alot, > Antonio. > > On 7/6/06, Grant Mills <gmills@ucsd.edu> wrote: >> Find and edit .wgetrc >> >> Set the proxies. There is one for http and one for ftp: >> >> http_proxy = >> ftp_proxy = >> >> Don't forget to enable the proxies either: >> >> use_proxy = on >> >> This may be of little use if your ftp proxy server does not conform to >> what wget supports. NcFTP and FileZilla both have much broader >> support for proxy servers. >> >> On 7/6/06, Fischetti Antonio <antonio.fischetti@gmail.com> wrote: >> > I'm can't download with >> > wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl >> > >> > It says "Unresolved Host". >> > I am under a proxy. >> > Do I need a special version of wget. Sort of 'socks' style? >> > >> > Thanx. >> > >> > -- >> > Before posting, please read the FAQ: >> http://ecos.sourceware.org/fom/ecos >> > and search the list archive: >> http://ecos.sourceware.org/ml/ecos-discuss >> > >> > >> >> >> -- >> Grant Mills >> gmills@ucsd.edu >> > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* [ECOS] Re: wget problem for the Proxy 2006-07-07 8:34 ` Alex Schuilenburg @ 2006-07-07 11:40 ` Fischetti Antonio 2006-07-07 15:31 ` [ECOS] Re: Re: " Fischetti Antonio 1 sibling, 0 replies; 6+ messages in thread From: Fischetti Antonio @ 2006-07-07 11:40 UTC (permalink / raw) To: Alex Schuilenburg; +Cc: ecos-discuss Wow!!! Thank you very much, it works!!!! But.... the download does work, it says "complete". It's the unpacking that doesn't work. Find below a copy from my shell. ___________________________ Please select GNU tools to download and install: 4 [1] arm-elf [2] i386-elf [3] mipsisa32-elf [*] powerpc-eabi [5] sh-elf [q] Finish selecting GNU tools ("*" indicates tools already selected) Please select GNU tools to download and install: q Entering C:\cygwin\opt\ecos Retrieving GNU tools for powerpc-eabi Connected... Downloading ecoscentric-gnutools-powerpc-eabi-1.4-2.cygwin.tar.bz2... File size 13,483,656 bytes [**************************************************] Retrieving eCos version 2.0 Connected... Downloading ecos-2.0.cygwin.tar.bz2... File size 14,337,622 bytes [**************************************************] Downloads complete. If you wish to disconnect from the internet you may do so now. Unpacking ecoscentric-gnutools-powerpc-eabi-1.4-2.cygwin.tar.bz2... Unpacking ecos-2.0.cygwin.tar.bz2... *** tar returned error. *** First five lines of error output believed to be: *** ecos-install.tcl error: tar unpack failed ___________________________ In my '/opt/ecos/gnutools/powerpc-eabi/bin' I see all the 'powerpc-...exe' files. So it seems that unpacking gnutools-powerpc tar files was successful. It's ecos2 unpacking that fails, isn't it? Thanx for your help, Antonio. On 7/7/06, Alex Schuilenburg <alexs@ecoscentric.com> wrote: > Fischetti Antonio wrote: > > Hi, it seems it improved a bit. > > My 'wgetrc' file now looks like (I replaced the real Proxy name, IP > > and port with > > <proxy_name>, <IP_proxy_addr>, and <port_number>) > > > > ______________ > > > > http_proxy = <proxy_name>:<port_number> > > ftp_proxy = <proxy_name>:<port_number> > > use_proxy = on > > ______________ > > > > > > This is what gets displayed on my Cygwin window > > ______________ > > $ wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > > --10:05:41-- ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > > => `ecos-install.tcl.1' > > Resolving <proxy_name>... <IP_proxy_addr> > > Connecting to <proxy_name>|<IP_proxy_addr>|:<port_number>... connected. > > Proxy request sent, awaiting response... 407 Proxy Authentication > > Required > > 10:05:41 ERROR 407: Proxy Authentication Required. > > ______________ > > > > And it stops. > > When I usually connect to the proxy (i.e. to surf the web) I provide a > > username and password. How can I add Username/password to 'wgetrc'? Or > > is there anything else to be done? > Also add to .wgetrc > > proxy_user = > > proxy_passwd = > > > -- Alex > > Managing Director / CEO eCosCentric Limited > http://www.ecoscentric.com/ The eCos and RedBoot experts > > > > > > > > Thanx alot, > > Antonio. > > > > On 7/6/06, Grant Mills <gmills@ucsd.edu> wrote: > >> Find and edit .wgetrc > >> > >> Set the proxies. There is one for http and one for ftp: > >> > >> http_proxy = > >> ftp_proxy = > >> > >> Don't forget to enable the proxies either: > >> > >> use_proxy = on > >> > >> This may be of little use if your ftp proxy server does not conform to > >> what wget supports. NcFTP and FileZilla both have much broader > >> support for proxy servers. > >> > >> On 7/6/06, Fischetti Antonio <antonio.fischetti@gmail.com> wrote: > >> > I'm can't download with > >> > wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > >> > > >> > It says "Unresolved Host". > >> > I am under a proxy. > >> > Do I need a special version of wget. Sort of 'socks' style? > >> > > >> > Thanx. > >> > > >> > -- > >> > Before posting, please read the FAQ: > >> http://ecos.sourceware.org/fom/ecos > >> > and search the list archive: > >> http://ecos.sourceware.org/ml/ecos-discuss > >> > > >> > > >> > >> > >> -- > >> Grant Mills > >> gmills@ucsd.edu > >> > > > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* [ECOS] Re: Re: Re: Re: wget problem for the Proxy 2006-07-07 8:34 ` Alex Schuilenburg 2006-07-07 11:40 ` [ECOS] " Fischetti Antonio @ 2006-07-07 15:31 ` Fischetti Antonio 1 sibling, 0 replies; 6+ messages in thread From: Fischetti Antonio @ 2006-07-07 15:31 UTC (permalink / raw) To: ecos-discuss; +Cc: Alex Schuilenburg Ooooops! My mistake. It was due to the lack of free space on my partition. I changed partition from C: to E: and installed again Cygwin, then sh ecos-install.tcl worked fine. I executed the command . /opt/ecos/ecosenv.sh Then when I run configtool.exe it asks for valid repository tree. I specify the root of eCos repository tree: E:\cygwin\opt\ecos\ecos-2.0 which is the directory that contains: acsupport, doc, examples, tools. The window appears but a lot of error messages say something like "This package does not have any valid version subdirectories" or such. After that the window is closed. Is there any setting I should do with ecosconfig.exe ? Thank you, Antonio. On 7/7/06, Alex Schuilenburg <alexs@ecoscentric.com> wrote: > Fischetti Antonio wrote: > > Hi, it seems it improved a bit. > > My 'wgetrc' file now looks like (I replaced the real Proxy name, IP > > and port with > > <proxy_name>, <IP_proxy_addr>, and <port_number>) > > > > ______________ > > > > http_proxy = <proxy_name>:<port_number> > > ftp_proxy = <proxy_name>:<port_number> > > use_proxy = on > > ______________ > > > > > > This is what gets displayed on my Cygwin window > > ______________ > > $ wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > > --10:05:41-- ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > > => `ecos-install.tcl.1' > > Resolving <proxy_name>... <IP_proxy_addr> > > Connecting to <proxy_name>|<IP_proxy_addr>|:<port_number>... connected. > > Proxy request sent, awaiting response... 407 Proxy Authentication > > Required > > 10:05:41 ERROR 407: Proxy Authentication Required. > > ______________ > > > > And it stops. > > When I usually connect to the proxy (i.e. to surf the web) I provide a > > username and password. How can I add Username/password to 'wgetrc'? Or > > is there anything else to be done? > Also add to .wgetrc > > proxy_user = > > proxy_passwd = > > > -- Alex > > Managing Director / CEO eCosCentric Limited > http://www.ecoscentric.com/ The eCos and RedBoot experts > > > > > > > > Thanx alot, > > Antonio. > > > > On 7/6/06, Grant Mills <gmills@ucsd.edu> wrote: > >> Find and edit .wgetrc > >> > >> Set the proxies. There is one for http and one for ftp: > >> > >> http_proxy = > >> ftp_proxy = > >> > >> Don't forget to enable the proxies either: > >> > >> use_proxy = on > >> > >> This may be of little use if your ftp proxy server does not conform to > >> what wget supports. NcFTP and FileZilla both have much broader > >> support for proxy servers. > >> > >> On 7/6/06, Fischetti Antonio <antonio.fischetti@gmail.com> wrote: > >> > I'm can't download with > >> > wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > >> > > >> > It says "Unresolved Host". > >> > I am under a proxy. > >> > Do I need a special version of wget. Sort of 'socks' style? > >> > > >> > Thanx. > >> > > >> > -- > >> > Before posting, please read the FAQ: > >> http://ecos.sourceware.org/fom/ecos > >> > and search the list archive: > >> http://ecos.sourceware.org/ml/ecos-discuss > >> > > >> > > >> > >> > >> -- > >> Grant Mills > >> gmills@ucsd.edu > >> > > > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-07-07 15:31 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2006-07-06 16:04 [ECOS] wget problem for the Proxy Fischetti Antonio 2006-07-06 16:34 ` Grant Mills [not found] ` <d32f14c80607070118j6e204780q80e00c28d280b7ec@mail.gmail.com> 2006-07-07 8:24 ` [ECOS] Re: " Fischetti Antonio 2006-07-07 8:34 ` Alex Schuilenburg 2006-07-07 11:40 ` [ECOS] " Fischetti Antonio 2006-07-07 15:31 ` [ECOS] Re: Re: " Fischetti Antonio
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).