Re: [ECOS] eCos and AT91SAM7S-EK

[wavecom wavecom <wavecomw@yahoo.com>]

--- Andrew Lunn <andrew@lunn.ch> wrote:

> > Andrew, could you describe me your method of
> running
> > and debugging eCos application, maybe I'm able to
> > reproduce it on my hardware. 
> > I'd like to ask about configuration of outgoing
> > messages. Where can I check if the output of
> prontf
> > commands is ARM-COM1?
> 
> I use Linux, not M$.
> 
> I build ROM applications, which for the AT91SAM7
> platforms is the
> default. I use the toolchain which you can download
> from the eCos
> website.  I use a JTAG device to load the image into
> the target. The
> JTAG device i use understands ELF, so i just give it
> a URL and the
> device grabs the elf file, converts it as necessary,
> and loads it onto
> FLASH. I then use gdb, to connect to the JTAG device
> in much the same
> way as you did. I there use the gdb version you
> download as part of
> the toolchain, or sometimes i use a newer version
> which i built
> myself. I would recommend you use the pre-build
> version to start with
> since it is known to work.

Where can I find such pre-build version?

> 
> The default configuration of the AT91SAM7SEK is to
> use the debug port
> for I/O.
> 
>     Andrew
> 
> -- 
> Before posting, please read the FAQ:
> http://ecos.sourceware.org/fom/ecos
> and search the list archive:
> http://ecos.sourceware.org/ml/ecos-discuss
> 
> 



      ____________________________________________________________________________________
Fussy? Opinionated? Impossible to please? Perfect.  Join Yahoo!'s user panel and lay it on us. http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss