From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 21497 invoked by alias); 31 Jan 2007 15:40:44 -0000 Received: (qmail 21488 invoked by uid 22791); 31 Jan 2007 15:40:43 -0000 X-Spam-Check-By: sourceware.org Received: from www.nabble.com (HELO talk.nabble.com) (72.21.53.35) by sourceware.org (qpsmtpd/0.31) with ESMTP; Wed, 31 Jan 2007 15:40:32 +0000 Received: from [72.21.53.38] (helo=jubjub.nabble.com) by talk.nabble.com with esmtp (Exim 4.50) id 1HCHZW-0001Rw-Th for ecos-discuss@ecos.sourceware.org; Wed, 31 Jan 2007 07:40:30 -0800 Message-ID: <8731428.post@talk.nabble.com> Date: Wed, 31 Jan 2007 15:40:00 -0000 From: rholmberg To: ecos-discuss@ecos.sourceware.org In-Reply-To: <5098085.post@talk.nabble.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Nabble-From: randy.holmberg@liposonix.com References: <5098085.post@talk.nabble.com> X-IsSubscribed: yes Mailing-List: contact ecos-discuss-help@ecos.sourceware.org; run by ezmlm Precedence: bulk List-Id: List-Subscribe: List-Archive: List-Post: List-Help: , Sender: ecos-discuss-owner@ecos.sourceware.org Subject: Re: [ECOS] Multi-cast mode warning X-SW-Source: 2007-01/txt/msg00184.txt.bz2 Tim, Can you please tell me if you were able to get the DP83848 to function properly with the AT91RM9200? I have an application that is planning to use the same DP83848CW Ethernety PHY with the AT91RM9200 - it would be very reassurring to know that someone has successfully implemented these items. Best Regards, Randy Holmberg Tim Hatton wrote: > > Hello, > I am currently in the process of try to get eCos (2.0.43) running on our > own hardware which uses an ATMEL AT91RM9200 CPU (bulit in MAC) and a > DP83848 PHY. I have used the eCos build from the AT91RM9200-EK and the > exisiting DP83847 driver (changing it to support the similar DP83848) as a > base and I have got to the stage where the ethernet link is established. I > am however getting the following warning message when initialising the > network: > > [eth_drv_ioctl] Warning: Driver can't set multi-cast mode > > Now, if everything worked I wouldn't be worried about this, but I don't > seem to be getting any IP packets out of the hardware (eCos is trying to > send DHCP discovery messages but they aren't coming out to the ethernet). > I suspect this may be a hardware issue but, I would like some confirm that > the warning above is or isn't anything I need to look into. > > My understanding of multi-cast mode is that I shouldn't need it or care > but if anyone could confirm or deny this I'd be very grateful. > Best regards, > Tim Hatton > Coherent Research Ltd > UK > > > > -- View this message in context: http://www.nabble.com/Multi-cast-mode-warning-tf1865903.html#a8731428 Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss