Re: [ECOS] Re: Trash when running RAM image

["alysson brito" <alysson.alysson@gmail.com>]

Thanks Gary!

I really should have payed more attention.

Actually, the result was [almost] the same though :(

RedBoot> load -m xm redboot_RAM.srec
CCEntry point: 0x00020040, address range: 0x00020000-0x00046d5c
xyzModem - CRC mode, 3574(SOH)/0(STX)/0(CAN) packets, 5 retries
RedBoot> go
$T050f:54000200;0d:ec0ffd03;#e3

I have also tryed to up load the .bin image (using the -r) but it did
not work out either:

RedBoot> load -r -m xm -b 0x00020040 redboot_RAM.bin
CCRaw file loaded 0x00020040-0x00046d9b, assumed entry at 0x00020040
xyzModem - CRC mode, 1243(SOH)/0(STX)/0(CAN) packets, 2 retries
RedBoot> go
$T0a0f:0002014c;0d:ec0ffd03;#3e

I guess i am almost out of options ... Any other idea of what is still wrong ?


On 5/2/07, Gary Thomas <gary@mlbassoc.com> wrote:
> alysson brito wrote:
> > Hi
> > I am newbie on RedBoot. I am using redboot on an intel board.
> > I am [trying] to load and run a RAM image, since I do not want to mess
> > up the currently [runnable] image that is on the rom memory and is
> > working.
> > But the image I got from intel and the image I built from the sources
> > are showing up some trash on the console when i execute them
> > [for instance: $T0a0f:0c002000;0d:ec0ffd03;#39]. This pattern goes on
> > an on for each key I press.
> > I am loading the file redboot_RAM.srec [load -v -r -m xmodem -b
> > 0x00200000  redboot_RAM.srec] [I also tried via tftp, same result...]
> > and shooting "go" ro make it run, but all the time I get this output.
> > Would any know what might be wrong ? I'd guess I am executing a some
> > memory position that has nothing there ... But I do not know how to go
> > on. Any help would be really appreciated.
> >
> > I also tryed "go redboot_RAM.srec"  but it did not work either...
>
> The options you are using for the download is causing the problem.
> Try this:
>   RedBoot> lo -m xm redboot_RAM.srec
>   RedBoot> go
>
> Your options do two things wrong:
>  -r: downloads the image raw, which means you've loaded ASCII S-records
>      into memory - these are not executable instructions
>  -b: eCos programs are not relocatable, hence they must be loaded at
>      their native address. 0x200000 is probably not the correct address.
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
>

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss