RE: [ECOS]Hello World on AEB rev.C

["Narayanan, Anita (CTS)" <Nanita@chn.cognizant.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3180 bytes --]

Hi Andrea,

I think you have successfully installed AEB 1. I just need some help
regarding the installation. I too am following the  instructions as given in
"Getting started with eCos" in the section "ARM AEB 1 hardware setup"
The steps i followed so far is given below:

~í
ARM Evaluation Board Boot Monitor 1.01 (18 NOV 1999)
Press ENTER within 2 seconds to stop autoboot

Boot: rommodules

Header   Base     Limit
04000004 04000000 0400360d BootStrap       1.01 (18 NOV 1999)
04003a74 04003800 04003bc0 Production Test 1.00 (13 Aug 1998)
0400e7a4 04004000 0400e7ec Angel           1.03 (08 Mar 1998)

Boot: download c000
Ready to download. Use 'transmit' option on terminal emulator to download
file.
Loaded file gdb_module.bin at address 0000c000, size = 19392

Boot: rommodules

Header   Base     Limit
04000004 04000000 0400360d BootStrap       1.01 (18 NOV 1999)
04003a74 04003800 04003bc0 Production Test 1.00 (13 Aug 1998)
0400e7a4 04004000 0400e7ec Angel           1.03 (08 Mar 1998)


As you can see, i donot see the ecos stub loaded in the flash. Am i doing
something wrong?
Can you please help me out?

Anita





> -----Original Message-----
> From:	Andrea Acquaviva [SMTP:acquaviva@deis.unibo.it]
> Sent:	Wednesday, November 08, 2000 7:48 PM
> To:	ecos-discuss@sources.redhat.com
> Subject:	Re: [ECOS]Hello World on AEB rev.C
> 
> Jonathan Larmour wrote:
> 
> >
> >
> > If you just connect with a direct serial connection, when you power on
> the
> > board you should be able to see output like ++$T01.....
> >
> > If not, then the gdb stub is not programmed onto the board correctly.
> >
> > Jifl
> > --
> > Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS  Tel: +44 (1223)
> 728762
> > "Plan to be spontaneous tomorrow."  ||  These opinions are all my own
> fault
> 
> Hi,
> 
> this is the output I find when I power on the board (using minicom) under
> Linux
> OS:
> 
> .í.cä
> ARM Evaluation Board Boot Monitor 1.01 (18 NOV 1999)
> Press ENTER within 2 seconds to stop autoboot
> Scanning ROM for modules ...
>   Found module 'BootStrap' at 04000004
>   Found module 'ProductionTest' at 04003a74
>   Found module 'Angel' at 0400e7a4
>   Found module 'eCos' at 0401ba6c
> Boot:
> 
> I followed the instruction in "Getting started with eCos", section "ARM
> AEB-1
> Hardware Setup".
> 
> I don't see the string you mentioned. In addition, I don't understand the
> meaning
> of the
> first sequence of characters.
> 
> Have you any idea about the problem?
> 
> 
> --
> Ing. Andrea Acquaviva
> D.E.I.S. - Universita' di Bologna
> V.le Risorgimento, 2    40136 BOLOGNA (ITALY)
> Tel: (+39) 051 20 93787 Fax: (+39) 051 2093786
> 
> 

This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential and privileged information.
If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
Any unauthorised review, use, disclosure, dissemination, forwarding, printing or copying of this email or any action taken in reliance on this e-mail is strictly
prohibited and may be unlawful.

		Visit us at http://www.cognizant.com