* [ECOS] eCos on V4FX12
@ 2007-03-02 23:00 Glenn Heart
2007-03-02 23:46 ` Gary Thomas
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Glenn Heart @ 2007-03-02 23:00 UTC (permalink / raw)
To: ecos-discuss
I am trying to get eCos running on a Xilinx V4 FX12 FPGA using the
PPC. I am using the MiniModule from Avnet/Memec (
http://www.em.avnet.com/evk/home/0,1719,RID%253D0%2526CID%253D25726%2526CCD%253DUSA%2526SID%253D32214%2526DID%253DDF2%2526SRT%253D1%2526LID%253D32232%2526PRT%253D0%2526PVW%253D%2526BID%253DDF2%2526CTP%253DEVK,00.html
)
Following the instructions I was able to compile eCos pretty easily.
I only used the console and ethernet. Running eCos on the FPGA seemed
to work. The console showed:
+No network interfaces found
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version UNKNOWN - built 22:40:21, Feb 18 2007
Platform: XILINX VIRTEX4 (PowerPC 405)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
RAM: 0x00000000-0x04000000, [0x000261d8-0x04000000] available
RedBoot>
I was then ready to input commands on the console and found the system
was locked up. Anybody have any ideas what I am doing wrong.
Thanks,
Glenn
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] eCos on V4FX12
2007-03-02 23:00 [ECOS] eCos on V4FX12 Glenn Heart
@ 2007-03-02 23:46 ` Gary Thomas
[not found] ` <c1d5a6ab0703021500n7226db56m71d2a211059b208c@mail.gmail.co m>
2007-03-04 14:34 ` mtotor
2 siblings, 0 replies; 4+ messages in thread
From: Gary Thomas @ 2007-03-02 23:46 UTC (permalink / raw)
To: Glenn Heart; +Cc: ecos-discuss
Glenn Heart wrote:
> I am trying to get eCos running on a Xilinx V4 FX12 FPGA using the
> PPC. I am using the MiniModule from Avnet/Memec (
> http://www.em.avnet.com/evk/home/0,1719,RID%253D0%2526CID%253D25726%2526CCD%253DUSA%2526SID%253D32214%2526DID%253DDF2%2526SRT%253D1%2526LID%253D32232%2526PRT%253D0%2526PVW%253D%2526BID%253DDF2%2526CTP%253DEVK,00.html
>
> )
>
> Following the instructions I was able to compile eCos pretty easily.
> I only used the console and ethernet. Running eCos on the FPGA seemed
> to work. The console showed:
>
>
> +No network interfaces found
>
> RedBoot(tm) bootstrap and debug environment [ROMRAM]
> Non-certified release, version UNKNOWN - built 22:40:21, Feb 18 2007
>
> Platform: XILINX VIRTEX4 (PowerPC 405)
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
>
> RAM: 0x00000000-0x04000000, [0x000261d8-0x04000000] available
> RedBoot>
>
>
> I was then ready to input commands on the console and found the system
> was locked up. Anybody have any ideas what I am doing wrong.
Talk to Mind &/or Xilinx - this code is not in the public
repository.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] eCos on V4FX12
[not found] ` <c1d5a6ab0703021500n7226db56m71d2a211059b208c@mail.gmail.co m>
@ 2007-03-03 2:07 ` Chuck McManis
0 siblings, 0 replies; 4+ messages in thread
From: Chuck McManis @ 2007-03-03 2:07 UTC (permalink / raw)
To: Glenn Heart; +Cc: ECOS Discussion Group
At 03:00 PM 3/2/2007, you wrote:
>I was then ready to input commands on the console and found the system
>was locked up. Anybody have any ideas what I am doing wrong.
>
>Thanks,
>Glenn
Do you have more than 1 possible console? In particular is there another
serial port compiled in that may be open circuited? I found that once
Redboot "picks" which console is the one its going to use any other
consoles go dead.
Check your ecos.ecc to see that there is only 1 possible console and you
then be sure to be connected to that one ;-)
--Chuck
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] eCos on V4FX12
2007-03-02 23:00 [ECOS] eCos on V4FX12 Glenn Heart
2007-03-02 23:46 ` Gary Thomas
[not found] ` <c1d5a6ab0703021500n7226db56m71d2a211059b208c@mail.gmail.co m>
@ 2007-03-04 14:34 ` mtotor
2 siblings, 0 replies; 4+ messages in thread
From: mtotor @ 2007-03-04 14:34 UTC (permalink / raw)
To: ecos-discuss
Hello Guy,
I am not sure that you understand what is really eCos. In your presentation
you were talkink about RedBoot which is only a boot loader from Red Hat.
You can find more info at www.codexchangers.com/ecos/html
Were are your source for V4?
A+G
Glenn Heart wrote:
>
> I am trying to get eCos running on a Xilinx V4 FX12 FPGA using the
> PPC. I am using the MiniModule from Avnet/Memec (
> http://www.em.avnet.com/evk/home/0,1719,RID%253D0%2526CID%253D25726%2526CCD%253DUSA%2526SID%253D32214%2526DID%253DDF2%2526SRT%253D1%2526LID%253D32232%2526PRT%253D0%2526PVW%253D%2526BID%253DDF2%2526CTP%253DEVK,00.html
> )
>
> Following the instructions I was able to compile eCos pretty easily.
> I only used the console and ethernet. Running eCos on the FPGA seemed
> to work. The console showed:
>
>
> +No network interfaces found
>
> RedBoot(tm) bootstrap and debug environment [ROMRAM]
> Non-certified release, version UNKNOWN - built 22:40:21, Feb 18 2007
>
> Platform: XILINX VIRTEX4 (PowerPC 405)
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
>
> RAM: 0x00000000-0x04000000, [0x000261d8-0x04000000] available
> RedBoot>
>
>
> I was then ready to input commands on the console and found the system
> was locked up. Anybody have any ideas what I am doing wrong.
>
> Thanks,
> Glenn
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
>
--
View this message in context: http://www.nabble.com/eCos-on-V4FX12-tf3336531.html#a9296386
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-03-04 14:34 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-03-02 23:00 [ECOS] eCos on V4FX12 Glenn Heart
2007-03-02 23:46 ` Gary Thomas
[not found] ` <c1d5a6ab0703021500n7226db56m71d2a211059b208c@mail.gmail.co m>
2007-03-03 2:07 ` Chuck McManis
2007-03-04 14:34 ` mtotor
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).