From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfram Kattanek To: Jonathan Larmour Cc: ecos-discuss Subject: Re: [ECOS] Problems with CEB-v850/SA1 Date: Thu, 08 Feb 2001 03:16:00 -0000 Message-id: <981630950.3a827fe6412de@imp.imms.de> References: <980203267.3a6cb70375bcb@imp.imms.de> <3A6CC0A1.2A7CBDF6@redhat.com> X-SW-Source: 2001-02/msg00115.html Jonathan Larmour : > As for your other problem, I have fixed that in local sources as it > happens, but haven't checked it in yet. I've attached a known good GDB stub > ROM. Use v850-elf-objcopy to copy it from ELF to other formats for > programming (bin, srec). > > You will also need to make sure the attached v850.hex file is programmed > into your chip internal flash. It may already be... I confess I'm not clear > on what the V850s on Cosmo boards ships with. Jonathan, not long ago you helped us with our problems regarding the CEB-v850/SA1 board. You sent a "known good GDB stub" file and mentioned that you eventually will check in the fixed local sources. Did you do that already? Or can you give us a hint which sources we have to use to build a "good GDB stub" for our own? We need a "good" starting point for our porting activities. What is the function of v850.hex file? Because of some HW problems we couldn't program it yet. We're trying to port eCos to another V850/SA1 board (startWARE from NEC) and thats why every information is very welcome! Wolfram -- Wolfram 'L.A.' Kattanek Institut fuer Mikroelektronik- und Email: LA@imms.de Mechatronik-Systeme (IMMS) gGmbH Tel: +49 3677 / 6783-55 Langewiesener Str. 22 Fax: +49 3677 / 6783-38 98693 Ilmenau / Germany ------------------------------------------------- This mail sent through IMP: imp.imms.de