From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 23584 invoked by alias); 13 Jun 2005 15:32:57 -0000 Mailing-List: contact ecos-discuss-help@ecos.sourceware.org; run by ezmlm Precedence: bulk List-Subscribe: List-Archive: List-Post: List-Help: , Sender: ecos-discuss-owner@ecos.sourceware.org Received: (qmail 23572 invoked by uid 22791); 13 Jun 2005 15:32:53 -0000 Received: from mum-pop2-b1.vsnl.net (HELO mum-pop2-b1.vsnl.net) (203.200.235.141) by sourceware.org (qpsmtpd/0.30-dev) with ESMTP; Mon, 13 Jun 2005 15:32:53 +0000 Received: from vsnl.net (pop2.vsnl.net [172.16.28.140]) by pop2.vsnl.net (vsnl mail server) with ESMTP id <0II1000K54ILOI@pop2.vsnl.net> for ecos-discuss@sourceware.org; Mon, 13 Jun 2005 21:02:45 +0530 (IST) Received: from [172.16.28.182] by pop2.vsnl.net (mshttpd); Mon, 13 Jun 2005 20:32:45 +0500 Date: Mon, 13 Jun 2005 15:32:00 -0000 From: prajeesh_77@vsnl.net To: ecos-discuss@sourceware.org Message-id: <9ecd259ec73f.9ec73f9ecd25@vsnl.net> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-language: en Content-transfer-encoding: 7BIT Content-disposition: inline Subject: [ECOS] Re: eCOS Intel x86 Port X-SW-Source: 2005-06/txt/msg00097.txt.bz2 Hi, Thank you for that information. I'm facing some problems with the eCOS configuration Tool version 2.11, I was previously using version 1.3.1. Should I go in for the latest version i.e 2.11. when I started using version 2.11 of the configuration tool it is asking for the path of the repository. There doesnt seem to be any info in the configtool-2.11-setup.exe downloaded from http://ecos.sourceware.org/ct2.html. Regards Prajeesh ----- Original Message ----- From: Gary Thomas Date: Monday, June 13, 2005 7:22 pm Subject: Re: eCOS Intel x86 Port > On Mon, 2005-06-13 at 15:40 +0500, prajeesh_77@vsnl.net wrote: > > Hi, > > I'm doing an eCOS Port to Intel x86. Can you please tell me > > the changes that needs to be done in the HAL > Architecture/Variant/Platform > > to do the port(sample code should help). > > Also can you just tell me the steps which are required to > install > > redboot on the PC before I get to install the ported eCOS code. > Any > > document on this would be exteremely helpful. > > These questions are appropriate for the mailing list > ecos-discuss@sourceware.org > Private support (at this email address) is only available with a > support contract. > > If you are using a "standard" PC, then all you need to do is write > an eCos program, load and run it via RedBoot. There are additional > deployment methods as well - check the online documentation at > http://ecos.sourceware.org/docs-latest/ > > -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss