RE: [ECOS] Redboot rebuild problem

["Wang, Liu \(Liu\)" <liuwang@agere.com>]

Thanks Gary.

I reinstall the eCos by doing CVS checking out.
I got the same warnings with the command "$ ecosconfig new pid stubs".
"ECOS_REPOSITORY" has been setup with "C:\Documents and
Settings\liuwang\anonymousCVS\ecos\packages" where the "ecosconfig.exe"
locates. I am using cygwin under Windows XP.

................
ecos.db, package CYGPKG_HAL_POWERPC_CSB281: warning
    This package does not have any valid version subdirectories.
ecos.db, package CYGPKG_DEVS_FLASH_CSB281: warning
    Version subdirectory `csb281' does not have a CDL script
`flash_csb281.cdl'.

ecos.db, package CYGPKG_DEVS_FLASH_CSB281: warning
    Version subdirectory `csb281' does not have a CDL script
`flash_csb281.cdl'.

ecos.db, package CYGPKG_DEVS_FLASH_CSB281: warning
    This package does not have any valid version subdirectories.
ecos.db, package CYGPKG_DEVS_ETH_CSB281: warning
    Version subdirectory `csb281' does not have a CDL script
`csb281_eth_drivers
.cdl'.
ecos.db, package CYGPKG_DEVS_ETH_CSB281: warning
    Version subdirectory `csb281' does not have a CDL script
`csb281_eth_drivers
.cdl'.
ecos.db, package CYGPKG_DEVS_ETH_CSB281: warning
    This package does not have any valid version subdirectories.
ecos.db, package CYGPKG_HAL_POWERPC_TS1000: warning
    Version subdirectory `ts1000' does not have a CDL script
`hal_powerpc_ts1000
.cdl'.
................


Regards,

Liu Wang
Software/Firmware Engineer
10C-359B LVC
1110 American Pkwy, Allentown
PA 18109, USA
(610)712-3472(o)
liuwang@agere.com




-----Original Message-----
From: Gary Thomas [mailto:gary@mlbassoc.com] 
Sent: Tuesday, October 25, 2005 6:37 PM
To: Wang, Liu (Liu)
Cc: eCos Discussion
Subject: Re: [ECOS] Redboot rebuild problem


On Tue, 2005-10-25 at 17:41 -0400, Wang, Liu (Liu) wrote:
> The following command "ecosconfig new se7751 reboot" in cygwin gives 
> the following warnings.
> 
> ...............
> ecos.db, package CYGPKG_HAL: warning
>     Version subdirectory `common' does not have a CDL script 
> `hal.cdl'. ecos.db, package CYGPKG_HAL: warning
>     This package does not have any valid version subdirectories. 
> ecos.db, package CYGPKG_INFRA: warning
>     Version subdirectory `infra' does not have a CDL script 
> `infra.cdl'. ............... Hardware selection: warning
>     The target specification lists a package `CYGPKG_HAL_SH' which is
> not presen
> t in the component repository.
> Hardware selection: warning
>     The target specification lists a package `CYGPKG_HAL_SH_SH4' which
> is not pr
> esent in the component repository.
> Hardware selection: warning
>     The target specification lists a package
> `CYGPKG_HAL_SH_SH7751_SE7751' which
>  is not present in the component repository.
> ...............
> 
> File 'ecos.db" has been changed by adding "/v2_0/cdl" to all the 
> directories of all packages. The first portion of the above warnings 
> gone. The second portion of the above warning are still there.
> 
> Your help will be highly appreciated in fixing the above warnings.

Why are you messing with the paths (as you mention above)?

I'd suggest that you just start by downloading the latest CVS tree and
everything will just work.
  http://ecos.sourceware.org/anoncvs.html

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss