Re: [ECOS] Multi-cast mode warning

["wang cui" <iucgnaw@msn.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=gb2312; format=flowed, Size: 2708 bytes --]

I am sure, "[eth_drv_ioctl] Warning: Driver can't set multi-cast mode" 
doesn't interfere normal IPv4 opreations. Maybe there are some hardware 
problem, or you need double check the register operations.

I got this waring on my target using dp83902a driver, and it doesn't 
matter.
However I have added the multicast support, and will contribute it after 
full test.

>From: rholmberg <randy.holmberg@liposonix.com>
>To: ecos-discuss@ecos.sourceware.org
>Subject: Re: [ECOS] Multi-cast mode warning
>Date: Wed, 31 Jan 2007 07:40:30 -0800 (PST)
>
>
>Tim,
>Can you please tell me if you were able to get the DP83848 to function
>properly with the AT91RM9200? I have an application that is planning to 
use
>the same DP83848CW Ethernety PHY with the AT91RM9200 - it would be very
>reassurring to know that someone has successfully implemented these items.
>
>
>Best Regards,
>
>Randy Holmberg
>
>
>
>Tim Hatton wrote:
> >
> > Hello,
> > I am currently in the process of try to get eCos (2.0.43)  running on 
our
> > own hardware which uses an ATMEL AT91RM9200 CPU (bulit in MAC) and a
> > DP83848 PHY. I have used the eCos build from the AT91RM9200-EK and the
> > exisiting DP83847 driver (changing it to support the similar DP83848) 
as a
> > base and I have got to the stage where the ethernet link is 
established. I
> > am however getting the following warning message when initialising the
> > network:
> >
> > [eth_drv_ioctl] Warning: Driver can't set multi-cast mode
> >
> > Now, if everything worked I wouldn't be worried about this, but I don't
> > seem to be getting any IP packets out of the hardware (eCos is trying 
to
> > send DHCP discovery messages but they aren't coming out to the 
ethernet).
> > I suspect this may be a hardware issue but, I would like some confirm 
that
> > the warning above is or isn't anything I need to look into.
> >
> > My understanding of multi-cast mode is that I shouldn't need it or care
> > but if anyone could confirm or deny this I'd be very grateful.
> > Best regards,
> > Tim Hatton
> > Coherent Research Ltd
> > UK
> >
> >
> >
> >
>
>--
>View this message in context: 
http://www.nabble.com/Multi-cast-mode-warning-tf1865903.html#a8731428
>Sent from the Sourceware - ecos-discuss mailing list archive at 
Nabble.com.
>
>
>--
>Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
>and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>

_________________________________________________________________
Ãâ·ÑÏÂÔØ MSN Explorer:   http://explorer.msn.com/lccn/  


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss