Re: [ECOS] how to booting the redboot on VMware

["jiang jet" <jetjiang@hotmail.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=gb2312; format=flowed, Size: 3317 bytes --]




>From: "xiaolu zhao" <deerxiaolu@gmail.com>
>To: "jiang jet" <jetjiang@hotmail.com>
>CC: ecos-discuss@ecos.sourceware.org
>Subject: Re: [ECOS] how to booting the redboot on VMware
>Date: Tue, 22 May 2007 22:58:17 +0200
>
>Thank you for your advice.  Currently I used a software which can
>provide virtual serial port. Thus the Host can communicate with 
>VMware
>and I can run the hello world on the virtual machine through the
>serial port.
>
welcome
>Can I ask you one more question?
>
>Because I just start to learn the software development on a RTOS, so 
>I
>have no idea about what is the application software on a RTOS looks
>like. I only have some experience  in embedded software development
>without a RTOS. Do you know where I can find some application 
>example
>on eCos or any other RTOS(more complicated than the examples in the
>ecos source code)?
>
in ecos there is no very strict distinction between app and 
kernel...actually the distinction between os and app in embedded system is 
not as obivious as in other enviorment
I don't know what kind of app you are looking for, maybe minigui is a good 
choice for u , however, i think ecos itself is really worth studying 
intensively 
>
>
>
>
>
>On 5/21/07, jiang jet <jetjiang@hotmail.com> wrote:
>>
>>
>>
>> >From: "xiaolu zhao" <deerxiaolu@gmail.com>
>> >To: ecos-discuss@ecos.sourceware.org
>> >Subject: [ECOS] how to booting the redboot on VMware
>> >Date: Sun, 20 May 2007 00:24:08 +0200
>> >
>> >Hi,
>> >I want to try the application examples in the 12th chapter of
>> >"Embedded software development with eCOS". I want to use a 
>>virtual
>> >machine on VMware software as my target. I already successfully
>> >install redboot in a virtual machine and see the RedBoot prompt.
>> >
>> >But when I try to booting redboot, in the step 10 and 11 which 
>>tests
>> >if the host and target connetec well. I found I the host and 
>>target
>> >are not connected.
>> >
>>you have boot the system up..could u please post the booting info?
>>or you can check what ur static ip address is?
>>or can u make sure the vmware is connected with host pc correctly?
>>or the ethernet cards that contains a controller supported by ecos?
>> >I used my notebook as the host. And I tried the HyperTerminal on 
>>the
>> >host to connect the target. Becuase the notebook has no serail 
>>port,
>> >so I choose  TCP/IP instead of serial port. And I use the IP 
>>address
>> >of the redboot image as the "host address". But the redboot can 
>>not
>> >be
>> >conneted. Is there something wrong of my operation?
>> >
>> >Do you ever meet this problem? And would you like to give some
>> >advice
>> >how to solve it?
>> >
>> >Thank you so much in advance!
>> >
>> >Tina
>> >
>> >--
>> >Before posting, please read the FAQ:
>> >http://ecos.sourceware.org/fom/ecos
>> >and search the list archive:
>> >http://ecos.sourceware.org/ml/ecos-discuss
>> >
>>
>>_________________________________________________________________
>>Ãâ·ÑÏÂÔØ MSN Explorer:   http://explorer.msn.com/lccn/
>>
>>

_________________________________________________________________
Ãâ·ÑÏÂÔØ MSN Explorer:   http://explorer.msn.com/lccn  


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss