[ECOS] Networking tests error message "Warning : Driver can't set multi-cast mode"

[ECOS] Networking tests error message "Warning : Driver can't set multi-cast mode"

[Wu Michael]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=big5; format=flowed, Size: 2918 bytes --]

Hello ,

      I have a big trouble. Please give me some information.Thanks.

      When i use the eCos Networking Tests to test ethernet driver in 
SNDS100 target board ,
      the HyperTerminal show messages are as follows ,

     errno.cxx cyg_error_get_errno_p Cyg_Thread

     [cyg_net_init] Init: mbinit(0x00000000)

     [cyg_net_init] Init: cyg_net_init_devs(0x00000000)

     Init device 'ks32c5000'

    Enter to ethernet initial

    ks32c5000_eth_init()

    MAC address 08:88:12:34:56:78

    ks5000_ether: installInterrupts()

    Enter to ethernet initial ...

    EthInit(08:88:12:34:56:78)

    ks32C5000 eth: 34:12:88:08:78:56  Hardware CRC

    [cyg_net_init] Init: loopattach(0x00000000)

    [cyg_net_init] Init: ifinit(0x00000000)

    IFP: 0x0105e19c, next: 0x010c7f20

    IFP: 0x010c7f20, next: 0x00000000

   [cyg_net_init] Init: domaininit(0x00000000)

   [cyg_net_init] Init: cyg_net_add_domain(0x0105ea6c)

   New domain internet at 0x00000000

   [cyg_net_init] Init: cyg_net_add_domain(0x0105e524)

   New domain route at 0x00000000

   [cyg_net_init] Init: cyg_route_init(0x00000000)

   [cyg_net_init] Done

   start cpu index=6 schedule=1080bf0,&queue_map=1080bec,queue_map=800084c0

   start cpu index=7 schedule=1080bf0,&queue_map=1080bec,queue_map=80008480

    start cpu index=a 
schedule=1080bf0,&queue_map=1080bec,queue_map=80008400

    Start FTP test

    ks32c5000_eth_start()

[eth_drv_ioctl] Warning: Driver can't set multi-cast mode      
<====================

     ks32c5000_eth_stop()

     ks32c5000_eth_start()

     Enter to ethernet initial ...

     EthInit(08:88:12:34:56:78)

      ks32C5000 eth: 34:12:88:08:78:56  Hardware CRC

[eth_drv_ioctl] Warning: Driver can't set multi-cast mode     
<====================

      start cpu index=7 
schedule=1080bf0,&queue_map=1080bec,queue_map=80008480

     mutex.cxx sleep return call enqueue

      start cpu index=7 
schedule=1080bf0,&queue_map=1080bec,queue_map=80008080

       start

 $$ MAC Rx Frame : Good ( 0 ), Error ( 0 ) 
 --------------------------------------
 - Current Frame Descriptor Pointer : 05353734
   Frame Data Ptr          : 85353934
   Reserved Field          : 00000000
   Status and Frame Length : 00000000
   Next Frame Descriptor   : 05353744
 --------------------------------------
 - BDMARXPTR : 05061630   - BDMASTAT  : 00040000
 - BDMARXCON : 00006aef   - BDMARXLSZ : 000005f0
 - CAM Base  : 08881234   - BDMARXBUF : 00000001
 - MACCON    : 00000000   - CAMCON    : 00000014
 - MACRXCON  : 00002f01   - MACRXSTAT : 00000000
 --------------------------------------

_________________________________________________________________
§K¶O¸ÕÅ¥ MSN ­^»y¾Ç²ß¡G©M¯u¤H¦Ñ®v½u¤W¾Ç­^¤å http://www.msn.com.tw/english/ 


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss