* [ECOS] Hello please help me to run hello world for i386 without connecting hardware
@ 2001-09-02 22:06 latish sudheer
0 siblings, 0 replies; 4+ messages in thread
From: latish sudheer @ 2001-09-02 22:06 UTC (permalink / raw)
To: ecos-discuss
Hello,
I am very much new to ecos.I have followed the docoumentation and installed the ecos and cygwin tools and i configured for i386.
I have generated a sample program like hello world.
I have copied the make file from examples directory of ecos in to /d/cygwin/ecos/ecos-work/examples where ecos-work is my working directory.and iam having hello world application program.
ecosconfig --help //its working
ecosconfig list //its working
ecosconfig new pc//its working
ecosconfig tree //its working
make //its working
make tests //its working
I have given the command
make
it has generated the
hello.exe and hello.o
up to this it is working fine.
when i tried like
i386-elf-gdb -b 38400 com1
i am getting some gdb source window asking me to enter target details.
I tried but its hanging.
so i tried some thing like
i386-elf-gdb -nw hello.exe
<gdb>target remote com1
iam getting
Ignoring the packet error,continuing
Ignoring the packet error,continuing
Ignoring the packet error,continuing
and some thing like
malformed file to query and timed out
I am having "window nt" and i want to run with out any hardware connected.
Please tell me where i might have gone wrong.
Please help me in running my application.
with regards
sudheer
Get 250 color business cards for FREE!
http://businesscards.lycos.com/vp/fastpath/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] Hello please help me to run hello world for i386 without connecting hardware
2001-09-02 22:04 latish sudheer
[not found] ` <3B9310DD.A15B16AA@cisco.com>
@ 2001-09-04 5:28 ` Jesper Skov
1 sibling, 0 replies; 4+ messages in thread
From: Jesper Skov @ 2001-09-04 5:28 UTC (permalink / raw)
To: latish_sudheer; +Cc: ecos-discuss
>>>>> "latish" == latish sudheer <latish_sudheer@lycos.com> writes:
latish> I am having "window nt" and i want to run with out any
latish> hardware connected.
You can't for the ix86 architecture: you need either a Linux box and
use the synthetic target, or connect to a PC which boots RedBoot from
a floppy disk.
Alternatively, use a simulator target such as the PPC or AM31
ones. You'll find setup instructions on the web - but beware that
you'll need other tools.
Jesper
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] Hello please help me to run hello world for i386 without connecting hardware
[not found] ` <3B9315DF.831B3C44@cisco.com>
@ 2001-09-02 22:33 ` Prasad Kamath Nala
0 siblings, 0 replies; 4+ messages in thread
From: Prasad Kamath Nala @ 2001-09-02 22:33 UTC (permalink / raw)
To: ecos-discuss
Prasad Kamath Nala wrote:
> > Hi,
> > Actually, you are trying to download the program on to the hardware by using the command you have specified. You cannot do this unless you have a board connected to the COM port of you
> > host. Instead, you can use the simulator for running your app. You can directly use the gdb for running your program. Go through the documentation for simulators available in the
> > sources.redhat.com. Once you have the target board you can download and run the app.
> >
> > Hope this helps you
> >
> > regards
> > Prasad
> >
> > latish sudheer wrote:
> >
> > > Hello,
> > > I am very much new to ecos.I have followed the docoumentation and installed the ecos and cygwin tools and i configured for i386.
> > >
> > > I have generated a sample program like hello world.
> > >
> > > I have copied the make file from examples directory of ecos in to /d/cygwin/ecos/ecos-work/examples where ecos-work is my working directory.and iam having hello world application program.
> > >
> > > ecosconfig --help //its working
> > > ecosconfig list //its working
> > > ecosconfig new pc//its working
> > > ecosconfig tree //its working
> > >
> > > I have given the command
> > >
> > > make
> > >
> > > it has generated the
> > >
> > > hello.exe and hello.o
> > >
> > > up to this it is working fine.
> > >
> > > when i tried like
> > >
> > > i386-elf-gdb -b 38400 com1
> > >
> > > i am getting some gdb source window asking me to enter target details.
> > >
> > > I tried but its hanging.
> > >
> > > so i tried some thing like
> > > i386-elf-gdb -nw hello.exe
> > > <gdb>target remote com1
> > > iam getting
> > > Ignoring the packet error,continuing
> > > Ignoring the packet error,continuing
> > > Ignoring the packet error,continuing
> > >
> > > and some thing like
> > > malformed file to query and timed out
> > >
> > > I am having "window nt" and i want to run with out any hardware connected.
> > >
> > > Please tell me where i might have gone wrong.
> > > Please help me in running my application.
> > > with regards
> > > sudheer
> > >
> > > Get 250 color business cards for FREE!
> > > http://businesscards.lycos.com/vp/fastpath/
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ECOS] Hello please help me to run hello world for i386 without connecting hardware
@ 2001-09-02 22:04 latish sudheer
[not found] ` <3B9310DD.A15B16AA@cisco.com>
2001-09-04 5:28 ` Jesper Skov
0 siblings, 2 replies; 4+ messages in thread
From: latish sudheer @ 2001-09-02 22:04 UTC (permalink / raw)
To: ecos-discuss
Hello,
I am very much new to ecos.I have followed the docoumentation and installed the ecos and cygwin tools and i configured for i386.
I have generated a sample program like hello world.
I have copied the make file from examples directory of ecos in to /d/cygwin/ecos/ecos-work/examples where ecos-work is my working directory.and iam having hello world application program.
ecosconfig --help //its working
ecosconfig list //its working
ecosconfig new pc//its working
ecosconfig tree //its working
I have given the command
make
it has generated the
hello.exe and hello.o
up to this it is working fine.
when i tried like
i386-elf-gdb -b 38400 com1
i am getting some gdb source window asking me to enter target details.
I tried but its hanging.
so i tried some thing like
i386-elf-gdb -nw hello.exe
<gdb>target remote com1
iam getting
Ignoring the packet error,continuing
Ignoring the packet error,continuing
Ignoring the packet error,continuing
and some thing like
malformed file to query and timed out
I am having "window nt" and i want to run with out any hardware connected.
Please tell me where i might have gone wrong.
Please help me in running my application.
with regards
sudheer
Get 250 color business cards for FREE!
http://businesscards.lycos.com/vp/fastpath/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2001-09-04 5:28 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-09-02 22:06 [ECOS] Hello please help me to run hello world for i386 without connecting hardware latish sudheer
-- strict thread matches above, loose matches on Subject: below --
2001-09-02 22:04 latish sudheer
[not found] ` <3B9310DD.A15B16AA@cisco.com>
[not found] ` <3B9315DF.831B3C44@cisco.com>
2001-09-02 22:33 ` Prasad Kamath Nala
2001-09-04 5:28 ` Jesper Skov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).