From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hansjörg Petriffer To: "Ecos-Discuss (E-Mail)" Subject: [ECOS] Problems with run tests on a i386 platform Date: Thu, 22 Mar 2001 07:41:00 -0000 Message-id: X-SW-Source: 2001-03/msg00360.html I'm not sure if I make something wrong. I have made the following steps: -i386pc platform packeges stub -build library -bash-2.04$ dd conv=sync if=gdb_module.bin of=/dev/fd0 33+1 records in 34+0 records out -Made a new project (i386-default) Run tests (compiling is without errors) -run tests into the configuration tool Now I receive the following messages: *** 16:13:51 Run started GNU gdb 5.0 Copyright 2000 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i686-pc-cygwin --target=i386-elf"... (gdb) set height 0 (gdb) set remotedebug 0 Warning: command 'set remotedebug' is deprecated. Use 'set debug remote'. (gdb) set remotebaud 38400 (gdb) target remote com1 Remote debugging using com1 Ignoring packet error, continuing... Ignoring packet error, continuing... Ignoring packet error, continuing... Couldn't establish connection to remote target Malformed response to offset query, timeout (gdb) load You can't do that when your target is `exec' (gdb) break cyg_test_exit Breakpoint 1 at 0x16cef: file //d/daten/source/ecos/source/packages/infra/v1_3_1/src/tcdiag.cxx, line 116. (gdb) break cyg_assert_fail Function "cyg_assert_fail" not defined. (gdb) break cyg_test_init Breakpoint 2 at 0x16c0b: file //d/daten/source/ecos/source/packages/infra/v1_3_1/src/tcdiag.cxx, line 62. (gdb) cont The program is not being run. (gdb) set cyg_test_is_simulator=0 Address of symbol "cyg_test_is_simulator" is unknown. (gdb) cont The program is not being run. (gdb) *** 16:15:09 Run complete *** 16:15:09 Run complete It seems for me that something goes wrong with the serial comunication, because it makes no difference if the remote is running. I'm also not sure if the remote i386 Pc is working. If I use the floppy that I have made than I see on the upper left corner the following message: ++$T0508:dc370000;04:e00f0000;#4b Is this okay? As serial cable I use a Simple null modem without handshaking. Is this correct? Thanks for any hint! Hansjoerg