I set breackpoints through the windows interface.

Through the serial line, we had the same thing.
I mean the "CONTINUE" command doesn't work. Only the NEXTI and JUMP *0x60000
commands allow to run our aplication and stoped at the breackpoint.

Here is the card's Mapping :

RedBoot> version

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version v2_00_lpz - built 12:13:16, Jun  1 2004

Platform: Fydji (PowerPC MPC8270)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x04000000, [0x0003c580-0x03fdd000] available
FLASH: 0xff800000 - 0x00000000, 64 blocks of 0x00020000 bytes each.
RedBoot>

Thanks,

Emmanuel Coullien





Laurent GONZALEZ <laurent.gonzalez@silicomp.fr> le 01/06/2004 15:46:29
                                                           
                                                           
                                                           
 Pour  ecos-discuss@ecos.sourceware.org                    
 :                                                         
                                                           
 cc :  (ccc : Emmanuel COULLIEN/Faiveley)                  
                                                           
                                                           
                                                           
 Objet Re: [ECOS] GDB Initialisation problem               
 :