public inbox for
 help / color / mirror / Atom feed
* [ECOS] How to activate ethernet driver
@ 2015-04-07 21:10 Dennis S
  2015-04-09 12:15 ` Jerzy Dyrda
  0 siblings, 1 reply; 5+ messages in thread
From: Dennis S @ 2015-04-07 21:10 UTC (permalink / raw)
  To: ecos-discuss

Good evening,
I have a question concerning the programming of the ethernet in eCos.

The current state is, that I can use some existent functions for the
MAC of my Embedded System located in /devs/eth. They provide the
possibility to access the hardware via HAL_WRITE(). The init function
is used in the NETDEV_TAB macro.

Additionally I wrote some drivers for the seperated PHY with the
obligatory "phy_stat" function. When I started debugging I was very
suprised, that either the init function of the mac nor some function
of the PHY driver was used (I set a brakpoint there and nothing

So my question is: do I have to activate some other things to get
the ethernet work? What possibilities are there to check the result?
By the way: the plan is to use a third party TCP-stack later.

Kind regards,

Before posting, please read the FAQ:
and search the list archive:

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2015-04-10 14:30 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-07 21:10 [ECOS] How to activate ethernet driver Dennis S
2015-04-09 12:15 ` Jerzy Dyrda
     [not found]   ` <trinity-4777fcb7-729d-4f01-bb84-58b445200f13-1428584884951@3capp-webde-bs37>
2015-04-09 13:43     ` Jerzy Dyrda
     [not found]       ` <trinity-88db4679-45f1-4bed-85a9-70b78399a50a-1428657096995@3capp-webde-bs01>
2015-04-10 11:26         ` Jerzy Dyrda
2015-04-10 14:30           ` [ECOS] " Grant Edwards

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).