Re: [ECOS] Re: Redboot for Kinetis TWR-K70F120M

["Linh Nguyễn" <nvl1109@gmail.com>]

Dear all,
Good news. I have found and downloaded the Linux 2.6 kernel for
Cortex-M (currently is M3 for STM32F2, LPC1788, ARM fusion A2F) and
built successfully. I can porting to Cortex-M4 based on this kernel.
This is the link:
http://www.emcraft.com/index.php/component/jdownloads/view.download/6/8
or
http://www.emcraft.com/index.php/technology/98    (file name:
a2f-linux-linux-2.6.tar.bz2)

Thanks & Regards,
Linh Nguyen

On Tue, Jan 10, 2012 at 3:03 PM, Ilija Kocho <ilijak@siva.com.mk> wrote:
> Linh
>
> Thank you for references.oreo
>
>
> On 10.01.2012 03:38, Linh Nguyễn wrote:
>>
>> http://www.linux-arm.org/LinuxKernel/LinuxM3 this is the link about
>> Linux kernel for Cortex M3. I don't know much about ARM but I think
>> Cortex M3 and M4 is not much different.
>
>
> Something being ported to Cortex-M architecture is a big step but it does
> not mean that it is ported to some hardware, being it  Kinetis, STM32, LPC,
> etc. There's still some work (although not too much) such as basic hw
> initialization, clocking, some serial driver, etc.
>
>
>>
>>
>> http://www.cnx-software.com/2011/12/30/linux-for-cortex-m3-m4-microcontrollers/
>> this link said that "EmCraft also sells Linux BSP (for 99 USD –
>> software only) for STMicroelectronics STM32F2, NXP NXP LPC1788
>> (Cortex M3) and Freescale Kinetis (Cortex M4) development boards.".
>
>
> This looks promising although information is incomplete, they don't mention
> on what hardware to run uClinux for Kinetis and I guess TWR-K60N512 has too
> little memory. Of course TWR-K70 has more than enough.
>
>
>>
>> So why uClinux can not port to Kinetis K70?
>
> I haven't stated that. I merely asked for information on such port. Thanks
> again for information.
>
> Ilija
>
>
> On Tue, Jan 10, 2012 at 4:37 AM, Ilija Kocho <ilijak@siva.com.mk> wrote:
>>>
>>> On 07.01.2012 11:35, Linh Nguyễn wrote:
>>>>
>>>> Opps, my fail. "go" command occurs ^^!.
>>>>
>>>> About "exec" command. Does it require MMU to load Linux kernel?
>>>> http://www.arm.com/community/software-enablement/linux.php?tab=uClinux
>>>> this link said that uClinux&    u-boot can run with *NON MMU* ARM
>>>>
>>>> processors. Do you have any ways to run bootloader and Linux kernel
>>>> (uClinux) on *NON MMU* ARM??? Thanks so much.
>>>
>>> Not at the moment.
>>> I wonder if uClinux has being ported to Kinetis? Any reference?
>>>
>>>
>>> Ilija
>>>
>>>
>>> --
>>> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
>>> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>>>
>
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss