* [ECOS] [EB40]why redboot check my RAM smaller?
[not found] <20040525221607.37337.qmail@eyou.com>
@ 2004-05-25 14:45 ` zhuyong
0 siblings, 0 replies; 2+ messages in thread
From: zhuyong @ 2004-05-25 14:45 UTC (permalink / raw)
To: ecos-discuss
hi list,
I download ecos packages from ecos snapshot five days earlier.
I have one customed board based on AT91M40800(AT91X40),is similar with EB40.
I have 1M FLASH and 2M SRAM on board,and address as follows:
flash: 0x01000000-0x010FFFFF
sram: 0x02000000-0x021FFFFF
so I change packages/hal/arm/at91/eb40/current/include/hal_platform_setup.h:
_InitMemory:
.long 0x0100202E // 0x01000000, 1MB, 8-bit,
.long 0x02002081 // 0x02000000, 2MB, 16-bit
I build redboot_rom.bin and download it to 0x0101000,but redboot start and
have this info through serial as follows:
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN - built 16:39:53, May 24 2004
Platform: Atmel AT91/EB40 (ARM7TDMI)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x02000000-0x02080000, [0x02005328-0x02080000] available
RedBoot>
why available RAM is so small, can i load one file larger than 800k to RAM?
regards
zhuyong
--http://www.eyou.com
--Ãö¨¿Ã¿¿µÃµçÃÃÃÃ
Ãä ÃïÃôÃüþ Ãö¯Ãéé ÃÃÃú·þÃñ ÃøÃç´æ´¢...ÃÃÃÃô¾¡
--http://vip.eyou.com
--¿ì¿ìµÃüÃÃÃÃVIPÃÃ
Ãä â²áÃúÃÃÃâµÃÃÃȤÃû
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 2+ messages in thread