From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Nagendra EM" To: nagendra.em@eudoramail.com, "Jesper Skov" Cc: "Gary Thomas" , ecos-discuss@sources.redhat.com, "Jonathan Larmour" Subject: Re: [ECOS] How to RUN a program? Date: Wed, 04 Jul 2001 03:39:00 -0000 Message-id: X-SW-Source: 2001-07/msg00099.html Hi, Thanks again, but with one more problem now. Now it is able to run the program, after that it does not come out. May be I should post this on the GDB site, but if you know and can suggest something, it will be great. The output is here... ------------------------------------------------------------------- (gdb) target remote COM2 Remote debugging using COM2 0x5000bd64 in ?? () (gdb) set remotebaud 38400 (gdb) load bsearch.exe Loading section .rom_vectors, size 0x40 lma 0x20000 Loading section .text, size 0x6450 lma 0x20040 Loading section .rodata, size 0x608 lma 0x26490 Loading section .data, size 0x4b8 lma 0x26a98 Start address 0x20040 , load size 28496 Transfer rate: 28496 bits/sec, 299 bytes/write. (gdb) continue Continuing. INFO: PASS: PASS: PASS: PASS: PASS: PASS: EXIT: -------------------------------------------------------------------- Thanks and Regards, - Nagendra. -- On 04 Jul 2001 10:44:58 +020 Jesper Skov wrote: >>>>>> "Nagendra" == Nagendra EM writes: > >Nagendra> Hi, I was trying the configuration which you suggested. It >Nagendra> loads the exe file, but same problem again...it stops after >Nagendra> printing continue and never comes out of it. > >[snip] >Nagendra> please suggest... > >Try building and running one of the eCos tests instead of the hello.c >example. > >Jesper > Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com