From mboxrd@z Thu Jan 1 00:00:00 1970 From: "vipin mehta" To: ecos-discuss@sources.redhat.com Subject: [ECOS] loading srec files thru redboot Date: Fri, 13 Jul 2001 05:55:00 -0000 Message-id: X-SW-Source: 2001-07/msg00414.html Hi, Using the prebuilt redboot image (redboot.UU) for e7t board I've been successfully able to get the board boot from RedBoot on startup. So far so good. I have a test application now which i want to download onto the board using redboot. the application image is in the 'srec' format (Motorola S-Record; binary data in text format). i then execute RedBoot> load example.srec I get some Cs on the screen and after that some dots and after that it just times out saying "'example.srec' could not be loaded". what could i be missing ? also I faced some problems building my own redboot image. i did as was written in the manual ecosconfig new e7t redboot ecosconfig import $(ECOS_REPOSITORY)/hal/arm/e7t/current/misc/redboot_ROM.ecm ecosconfig tree make i get the image and i flashwrite it into the board. when i reboot the board it throws some junk characters onto my hyperterm configured at 38400 baud. I suspected some baudrate problem and so I tried this with hyperterm running at all the possible baud rates one by one. I cudn't succeed. what could be the problem ? regards, vipin _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com .