From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Nagendra EM" To: "Nagendra EM" , "Gary Thomas" Cc: ecos-discuss@sources.redhat.com, "Jonathan Larmour" Subject: Re: [ECOS] How to RUN a program? Date: Tue, 03 Jul 2001 10:31:00 -0000 Message-id: X-SW-Source: 2001-07/msg00081.html Hi, I was trying the configuration which you suggested. It loads the exe file, but same problem again...it stops after printing continue and never comes out of it. the output is here for your reference, ----------------------------------------------- gdb) target remote COM2 Remote debugging using COM2 0x0 in ?? () (gdb) set remotebaud 38400 (gdb) load hello.exe Loading section .rom_vectors, size 0x40 lma 0x20000 Loading section .text, size 0xafb0 lma 0x20040 Loading section .rodata, size 0x3f5 lma 0x2aff0 Loading section .data, size 0x4e8 lma 0x2b3e8 Start address 0x20040 , load size 47309 Transfer rate: 27033 bits/sec, 301 bytes/write. (gdb) continue Continuing. ---------------------------------------------- please suggest... regards, - Nagendra. -- On Tue, 03 Jul 2001 06:59:54 Gary Thomas wrote: > >On 03-Jul-2001 Nagendra EM wrote: >> Hi, >> These are the steps that have followed. >> >> 1. Built redboot.bin using the configuration tool. >> 2. Burnt the bootflash on SA1110 using the utility provided by the >> manufacturer. >> 3. Built the example program "hello" found in the examples directory >> using arm-elf-gcc and followed the steps given in the "Getting >> started" manual for ARM. (i.e., setting the PKG_INSTALL_DIR and >> XCC). >> 4. Started the ARM-GDB by invoking arm-elf-gdb.exe file. >> Now, on the gdb prompt, >> ---------------------------------------------------------- >> gdb) target remote COM2 >> Remote debugging using COM2 >> 0x0 in ?? () >> >> (gdb) load hello.exe >> Loading section .rom_vectors, size 0x40 lma 0x50000000 > ^^^^^^^^^^ > >This tells me that you tried to build the 'hello' program for ROM mode. >You need to have a startup type of RAM in order to load & run via GDB. > >The most likely reason for this would be that you tried to reuse a >configuration which you used to build RedBoot to build the application. >This is not correct. You must have a new configuration (build directory, >etc) for a new environment, namely RAM based applications. > > Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com