* [ECOS] Serial port configuration for RedBoot ouput
@ 2004-08-17 15:38 Nicolas Brouard
0 siblings, 0 replies; only message in thread
From: Nicolas Brouard @ 2004-08-17 15:38 UTC (permalink / raw)
To: ecos-discuss
Hi,
I'm working on a board with a MPC860. I ported RedBoot in RAM and ROM but I
have no output on my serial port SMC1. With my JTAG debugger, I can see that
RedBoot runs correctly: it goes in the initialize_stub function and then in
the cyg_start function and in the prompt loop.
I think it's almost correct, because when I initialize my board with the
bootloader from Embedded Planet, and then I run my RedBoot, everything is
OK: I have the RedBoot output, and it works fine.
So I suppose that something is not initialized.
Thanks for any pointers
Nicolas
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-08-17 15:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-08-17 15:38 [ECOS] Serial port configuration for RedBoot ouput Nicolas Brouard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).