From: "John" <john@imining.com.tw>
To: "Jitendra kanitkar" <Jitendrak@netbrahma.com>
Cc: <ecos-discuss@sources.redhat.com>
Subject: RE: [ECOS] Can not connect to target x86 pc board
Date: Sun, 18 Feb 2001 22:30:00 -0000 [thread overview]
Message-ID: <NDBBKMEDOKEJKFEDGCLOGEKKCDAA.john@imining.com.tw> (raw)
In-Reply-To: <13D467F625FAD511AE2A00D0B7B917D7089D01@BRAHMA01>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3011 bytes --]
I have checked my pc board again
Both my pc boards of target and host just has 1 COM port
so I think it's hard to make mistakes
-----Original Message-----
From: Jitendra kanitkar [ mailto:Jitendrak@netbrahma.com ]
Sent: Monday, February 19, 2001 12:39 PM
To: 'John'
Cc: 'ecos-discuss@sources.redhat.com'
Subject: RE: [ECOS] Can not connect to target x86 pc board
HI,
Just check the cable and the port you are saying com1 is really COM1.
Coz i did the same mistake. In my case it was com2, to which iconnected the
cable.
Thanks,
Jitendra.
> ----------
> From: John[SMTP:john@imining.com.tw]
> Sent: Monday, February 19, 2001 3:16 AM
> To: ecos-discuss@sources.redhat.com
> Subject: [ECOS] Can not connect to target x86 pc board
>
> Hi all:
>
> I Have used Configuration Tool to make a boot floppy
> (hardware --> i386 pc target ; package --> stubs)
> and a eCos kernel without conflicts
> (hardware --> i386 pc target ; package --> default).
>
> I insert the boot floppy into my target Intel PII pc board and use a cable
> to connect my host(COM1) and target(COM1).
> After booting my target, the target monitor shows
> ++$T0508:e03b0000;04:e00f0000;#44
> And then I use Configuration Tool
> Tools-->Run Tests-->Run
> to test it and the following output message shows
>
> *** 10:54:31 Run started
> GNU gdb 5.0
> Copyright 2000 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public License, and you
> are
> welcome to change it and/or distribute copies of it under certain
> conditions.
> Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB. Type "show warranty" for
> details.
> This GDB was configured as "--host=i586-pc-cygwin --target=i386-elf"...
> (gdb) set height 0
> (gdb) set remotedebug 0
> Warning: command 'set remotedebug' is deprecated.
> Use 'set debug remote'.
>
> (gdb) set remotebaud 38400
> (gdb) target remote com1
> Remote debugging using com1
> Ignoring packet error, continuing...
> Ignoring packet error, continuing...
> Ignoring packet error, continuing...
> Couldn't establish connection to remote target
> Malformed response to offset query, timeout
> (gdb) load
> You can't do that when your target is `exec'
> (gdb) break cyg_test_exit
> Breakpoint 1 at 0x138df: file
> //d/PROGRA~1/REDHAT~1/eCos/packages/infra/v1_3_1/src/tcdiag.cxx, line 116.
> (gdb) break cyg_assert_fail
> Function "cyg_assert_fail" not defined.
> (gdb) break cyg_test_init
> Breakpoint 2 at 0x137fb: file
> //d/PROGRA~1/REDHAT~1/eCos/packages/infra/v1_3_1/src/tcdiag.cxx, line 62.
> (gdb) cont
> The program is not being run.
>
> What's wrong?
> Thanks in advance.
>
> ----
> ÃÃȬÂõ
> John Hsieh
> µo²{ªÃ°ê»ÃªÃ¥÷¦³Â¤½¥q
> iMining Technology Co., Ltd.
> john@imining.com.tw
> TEL: 886-2-27235122
> FAX: 886-2-27232287
> www.imining.com.tw
>
next prev parent reply other threads:[~2001-02-18 22:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-18 20:38 Jitendra kanitkar
2001-02-18 22:30 ` John [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-02-18 19:19 John
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=NDBBKMEDOKEJKFEDGCLOGEKKCDAA.john@imining.com.tw \
--to=john@imining.com.tw \
--cc=Jitendrak@netbrahma.com \
--cc=ecos-discuss@sources.redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).