* [ECOS] ECOS Building tools under Linux 6.2
@ 2000-10-13 13:41 Leandro Vieira
2000-10-13 14:50 ` Jonathan Larmour
0 siblings, 1 reply; 2+ messages in thread
From: Leandro Vieira @ 2000-10-13 13:41 UTC (permalink / raw)
To: ecos-discuss, ecos-discuss-help, ecos-discuss-info, ecos-discuss-faq
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2685 bytes --]
Hello.
I had completed building tools under windows NT with binutils-2.10,gcc
2.95.2 and gdb 5.0. and had also applyed the patch ecos-gcc-2952.pat to
gcc.
This process it's the same that i have been try to do under Linux 6.2
without sucess.
So i moved that i had in Windows NT to correspondent folder in Linux.
Now i'm trying to build the tools for Synthetic Linux target:
i followed all steps in agreement with document.
in step 3 of document, when i try configure GCC i get the follow error
message, it's the only
message that i get:
*** connot find config.sub.
but inside of this folder, /src/gcc/gcc-2.95.2/ , i see config.sub,
configure, configure.in, etc and i don't understand why it happens( the
error).
this is the sequence of instructions that i followed:
1.
mkdir -p /opt/ecos
cd /opt/ecos
gunzip < ecos-1.3.1.tar.gz | tar xvf - (for the gzip archive)
2. cd /src
cd -R /c/cygwin/src/* . Note: /c/cygwin/src/* is where i
have
binutils-2.10,gdb 5.0.
and gcc-2.95.2
with the patch ecos-gcc-2952.pat applyed to it.
after that the folder /src in the Linux looks like:
/src/binutils/binutils-2.10
/src/gcc/gcc-2.95.2
/src/gdb/insight-5.0
3.
mkdir -p /tmp/build/binutils
cd /tmp/build/binutils
/src/binutils/binutils-2.10/configure --target=i686-pc-linux-gnu \
--prefix=/tools \
--exec-prefix=/tools/H-i686-pc-linux-gnu \
-v 2>&1 | tee configure.out
4.
PATH=/tools/H-i686-pc-linux-gnu/bin:$PATH
export PATH
mkdir -p /tmp/build/gcc
cd /tmp/build/gcc
/src/gcc/gcc-2.95.2/configure --target=i686-pc-linux-gnu \
--prefix=/tools \
--exec-prefix=/tools/H-i686-pc-linux-gnu \
--with-gnu-as --with-gnu-ld --with-newlib \
-v 2>&1 | tee configure.out
Note: in this point that i get tha errorr message(*** connot find
config.sub.) .
5.
mkdir -p /tmp/build/gdb
cd /tmp/build/gdb
/src/gdb/insight-5.0/configure --target=i686-pc-linux-gnu \
--prefix=/tools \
--exec-prefix=/tools/H-i686-pc-linux-gnu \
-v 2>&1 | tee configure.out
*********************************************
NOTE: all other configuration was fine.
**********************************************
* Portugal Telecom *
* Instituto de Telecomunicações *
* Aveiro / Portugal *
* leandro@av.it.pt *
**********************************************
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ECOS] ECOS Building tools under Linux 6.2
2000-10-13 13:41 [ECOS] ECOS Building tools under Linux 6.2 Leandro Vieira
@ 2000-10-13 14:50 ` Jonathan Larmour
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Larmour @ 2000-10-13 14:50 UTC (permalink / raw)
To: leandro; +Cc: ecos-discuss
Leandro Vieira wrote:
>
> Hello.
>
> I had completed building tools under windows NT with binutils-2.10,gcc
> 2.95.2 and gdb 5.0. and had also applyed the patch ecos-gcc-2952.pat to
> gcc.
> This process it's the same that i have been try to do under Linux 6.2
> without sucess.
> So i moved that i had in Windows NT to correspondent folder in Linux.
> Now i'm trying to build the tools for Synthetic Linux target:
> i followed all steps in agreement with document.
> in step 3 of document, when i try configure GCC i get the follow error
> message, it's the only
> message that i get:
>
> *** connot find config.sub.
You moved the sources directly? At a guess config.sub doesn't have the
execute bit, so do chmod +x config.sub. Also check that config.sub is spelt
in lower case. And failing that, try doing yourself what the configure
script would do, which would be
/bin/sh /src/gcc/gcc-2.95.2/config.sub sun4
which should output:
sparc-sun-sunos4.1.1
Also I hope that whatever way you copied it wouldn't allow any CRLFs in -
it's something to watch out for if you have any more problems.
Jifl
--
Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS Tel: +44 (1223) 728762
"Plan to be spontaneous tomorrow." || These opinions are all my own fault
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2000-10-13 14:50 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-10-13 13:41 [ECOS] ECOS Building tools under Linux 6.2 Leandro Vieira
2000-10-13 14:50 ` Jonathan Larmour
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).