From: "Paul D. DeRocco" <pderocco@ix.netcom.com>
To: "eCos Discuss" <ecos-discuss@ecos.sourceware.org>
Subject: RE: [ECOS] Atmel EB40A: Redboot in ROM doesn't start
Date: Mon, 20 Jun 2005 16:49:00 -0000 [thread overview]
Message-ID: <NEBBKHCFDGIGIJEHDJFCIEMLPFAA.pderocco@ix.netcom.com> (raw)
In-Reply-To: <000b01c575a2$c827cb10$fda8fe90@emea.cisco.com>
> From: Jaws
>
> I'm using the Atmel Evaluation Board EB40A and I'm trying to
> install the
> Redboot in flash through Angel boot already present into the board.
> I'm following the document at the link:
> http://ecos.sourceware.org/ecos/docs-latest/redboot/at91.html
> and I succefully launched the redboot in RAM and copied the ROM version in
> FLASH, but when I reboot the board in the user mode nothing happens on the
> serial interface. So I immaging that the Redboot version in Flash didn't
> start.
> Anyone have experience of that? Is it possible to debug the
> Redboot ROM
> version in flash to understand what happens?
What I did was use Angel to burn the ROM Redboot into the other half of the
flash, and then swap the jumper. Worked fine. You might try that, just to
find out if the problem is with the loading and burning, not the version of
Redboot itself.
--
Ciao, Paul D. DeRocco
Paul mailto:pderocco@ix.netcom.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
prev parent reply other threads:[~2005-06-20 16:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-20 10:20 [ECOS] TCP: accept fails whereas connect succesful Thierry Brémard
2005-06-20 14:17 ` [ECOS] Atmel EB40A: Redboot in ROM doesn't start Jaws
2005-06-20 16:49 ` Paul D. DeRocco [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=NEBBKHCFDGIGIJEHDJFCIEMLPFAA.pderocco@ix.netcom.com \
--to=pderocco@ix.netcom.com \
--cc=ecos-discuss@ecos.sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).