public inbox for ecos-discuss@sourceware.org
 help / color / mirror / Atom feed
* [ECOS] Redboot Installation
@ 2001-05-27 22:47 Rajeev murthy
  2001-05-29 10:56 ` Jonathan Larmour
  0 siblings, 1 reply; 4+ messages in thread
From: Rajeev murthy @ 2001-05-27 22:47 UTC (permalink / raw)
  To: ecos-discuss

hi,
  i'm trying to install Redboot on my board which has a SamsungKS17C4000 microcontroller with ARM7 as its core. the board supports serial downloading of images and is configured for a ROM startup.

  i'm trying to understand which readme amongst the three provided (edb7xx , ebsa285 and user's guide) i've to use to start getting Redboot up and running on my board.
  how board specific is the installation procedure of Redboot?

  eventhough i built the four files, namely redboot.bin, redboot.img , redboot.elf and redboot.srec i'm not able to figure out how to get the Redboot> prompt.
 can anyone please tell me how to proceed after this.
thanks
rajeev


Get 250 color business cards for FREE!
http://businesscards.lycos.com/vp/fastpath/

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: [ECOS] Redboot Installation
@ 2001-05-30  9:08 Rajeev murthy
  2001-05-31 14:38 ` Jonathan Larmour
  0 siblings, 1 reply; 4+ messages in thread
From: Rajeev murthy @ 2001-05-30  9:08 UTC (permalink / raw)
  To: ecos-discuss; +Cc: Jonathan Larmour

 
--

On Tue, 29 May 2001 18:55:55  
 Jonathan Larmour wrote:
>Rajeev murthy wrote:
>> 
>> hi,
>>   i'm trying to install Redboot on my board which has a SamsungKS17C4000 microcontroller with ARM7 as its core. the board supports serial downloading of images and is configured for a ROM startup.
>> 
>>   i'm trying to understand which readme amongst the three provided (edb7xx , ebsa285 and user's guide) i've to use to start getting Redboot up and running on my board.
>
>RedBoot user's guide is the place to look for that.
>
>>   how board specific is the installation procedure of Redboot?
>
>In general, completely. How can you load programs onto the board? Does it
>have FLASH to program (and if so, have you written a driver)? Or can you
>program it with JTAG? Does it just have a socketed EPROM you can program?

for downloading the images, i have my own program-loader which is a variant of the SETTOP protocol. 
how much porting effort would it involve to make Redboot start communicating with the board.
    thanks for the configuration files of PID. 
rajeev




Get 250 color business cards for FREE!
http://businesscards.lycos.com/vp/fastpath/

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2001-05-31 14:38 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-05-27 22:47 [ECOS] Redboot Installation Rajeev murthy
2001-05-29 10:56 ` Jonathan Larmour
2001-05-30  9:08 Rajeev murthy
2001-05-31 14:38 ` Jonathan Larmour

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).