* [ECOS] Problems with eCos programs using delays on MPC860 based platform
@ 2000-09-08 20:44 Ross Wightman
0 siblings, 0 replies; only message in thread
From: Ross Wightman @ 2000-09-08 20:44 UTC (permalink / raw)
To: ecos-discuss
After a long period of fidling and hacking I finally have eCos up and
running on an MPC860 based platform that is most similar to the MBX. The
GDB stubs are running fine, I can commincate with the board and load
programs onto the board and run them. In fact I can run about 60-70% of
the kernel tests without problem.. and 2 of the 4 examples. I am,
unfortunately running into some rather perplexing problems with any
programs using timers, delays, etc. Calls to functions such as
cyg_thread_delay leave the processor stuck forever in exception handling
routines.
I have been trying to debug this problem for quite a few days now and it
has eaten up a lot more time that I would have liked. Any suggestions from
those more experienced than I would be much appreciated.
Here are some examples of programs that run/dont run:
run:
examples:
hello.c
serial.c
kernel tests:
clock0
memfix2
memvar2
intr0
except1
clockcnv
mutex0-2
thread0
mbox1 (takes awhile for the timed functions but seems to work)
don't run:
examples:
twothreads
simple-alarm
kernel tests:
memfix1
memvar1
clock1
thread1
mutex3
tm_basic (during Kernel Timed Tests)
mpc8xx tests:
intr0 (wrong count value, pit count goes to 5, but count also only
goes to 5 when it should be 42)
mbx tests:
mbxtime (goes kaboom after "Starting measured seconds..." is
displayed)
thanks
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-09-08 20:44 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-09-08 20:44 [ECOS] Problems with eCos programs using delays on MPC860 based platform Ross Wightman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).