From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gary Thomas To: "Narayana, Venkat A." Cc: "ecos-discuss@sourceware.cygnus.com" , Jonathan Larmour Subject: RE: [ECOS] Help! on building ecosconfigure Date: Thu, 19 Apr 2001 11:47:00 -0000 Message-id: References: X-SW-Source: 2001-04/msg00213.html On 19-Apr-2001 Narayana, Venkat A. wrote: > Hi, > I have cross-compiled gcc/ld/nm/objcopy/ar/as for 'arm-elf'( i already have > these for 'arm-linux'). And, after that, when i tried to compile redboot for > ROM startup( in accordance with page23 of Redboot User's guide), i am still > getting this error. > Is 'xscale-elf' a different format? Can't i use 'arm-elf' or 'arm-linux' in > lieu > of 'xscale-elf'? > They are basically the same, but slightly different configurations. >From the messages below, it does not look like 'xscale-elf-gcc' is calling the appropriate 'xscale-elf-ld' file. When you built these, what "configure" line did you use? In particular, what were the values for --prefix and --host-prefix? > Your help is greatly appreciated. > > Venkat N > > -----Original Message----- > From: Narayana, Venkat A. [ mailto:NarayVA@nsc-msg01.network.com ] > Sent: Wednesday, April 18, 2001 1:20 PM > To: 'Jonathan Larmour' > Cc: 'ecos-discuss@sourceware.cygnus.com' > Subject: RE: [ECOS] Help! on building ecosconfigure > > > Hi, > I compiled ecosconfig, and tried to build redboot for ROM startup, > whence i got these errors: > What is that i am doing wrong? > > _START_LOG__ > xscale-elf-gcc -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef > -Woverloaded-virtual -g -O2 -fno-rtti -fno-exceptions -fvtable-gc > -finit-priority -mapcs-frame -nostdlib -Wl,-r,--whole-archive -o > /home/users/redboot.ROM/install/lib/extras.o > /home/users/redboot.ROM/install/lib/libextras.a > /usr/arm/tools/arm-linux/bin/ld: unrecognised emulation mode: elf32arm ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This should be the xscale-elf version, not any arm-linux one. > Supported emulations: armelf_linux armelf_linux26 armelf > collect2: ld returned 1 exit status > make[1]: *** [/home/users/redboot.ROM/install/lib/extras.o] Error 1 > make[1]: Leaving directory `/home/users/redboot.ROM/hal/common/current' > make: *** [build] Error 2 > [root@narayva-nt redboot.ROM]# uname -a > Linux narayva-nt.network.com 2.2.5-15 #14 Wed Mar 28 10:02:40 CST 2001 i686 > unknown > _END_LOG___ > > > -----Original Message----- > From: Jonathan Larmour [ mailto:jlarmour@redhat.com ] > Sent: Wednesday, April 18, 2001 12:56 PM > To: Narayana, Venkat A. > Cc: 'ecos-discuss@sourceware.cygnus.com' > Subject: Re: [ECOS] Help! on building ecosconfigure > > > "Narayana, Venkat A." wrote: >> Moreover, i think that ecosconfig tool has something to do with >> cross-compilation.I reasoned that on the basis of input parameters >> that we pass to configure script.I went thru the 'ecos Getting started' >> manual and Redboot User's guide, but i didn't find any examples of making >> ecosconfigure tool. >> So, if i need to build Redboot ROM startup for ARM arch, then, since i use >> ecosconfig tool( page 23 of Redboot users guide), then shouldn't i compile >> ecosconfig to take care of cross-compilation? i guessing here. > > No, ecosconfig is purely a host-side tool. It has no knowledge of > particular targets. Using the prebuilt ones built for Linux and Windows, if > one of those is your host, should be fine. > > Jifl > -- > Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062 > Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine